User manual PHILIPS D5051

[. . . ] Always there to help you Register your product and get support at www. philips. com/welcome Question?Contact Philips D500 D505 Extended user documentation 1 Important safety instructions 3 2 Your phone 4 What is in the box Overview of the phone Overview of the base station Display icons 6 Text and numbers 16 Enter text and numbers 16 Switch between uppercase and lowercase 16 4 5 6 6 7 Phonebook 17 View the phonebook Search a record Call from the phonebook Access the phonebook during a call Add a record Edit a record Delete a record Delete all records Direct access memory 3 Get started 8 Connect the base station 8 Insert the supplied batteries 9 Configure your phone (country dependent) 9 Change the remote access PIN code 10 Charge the handset 10 Check the battery level 10 What is standby mode? 10 Check the signal strength 11 Switch the handset on or off 11 17 17 17 17 17 18 18 18 18 8 Call log 19 Call list type View the call records Save a call record to the phonebook Return a call Delete a call record Delete all call records 4 Calls 12 Make a call Answer a call End a call Adjust the earpiece/speaker volume Mute the microphone Turn the speaker on or off Make a second call Answer a second call Switch between two calls Make a conference call with the external callers 12 12 12 13 13 13 13 13 13 19 19 19 19 20 20 9 Redial list 21 View the redial records Redial a call Save a call record to the phonebook Delete a redial record Delete all redial records 21 21 21 21 21 13 10 Phone settings 22 Sound settings Set the date and time ECO mode ECO+ mode Name the handset Set the display language 22 23 23 23 24 24 5 Intercom and conference calls 14 Make a call to another handset Transfer a call Make a conference call 14 14 14 EN 1 English Contents 11 Alarm clock 25 Set the alarm Turn off the alarm 25 25 12 Telephone answering machine 26 Turn the answering machine on or off 26 Set the answering machine language 26 Set the answer mode 26 Announcements 26 Incoming messages 27 Set the ring delay 28 Remote access 29 13 Services 31 Call list type Auto conference Network type Auto prefix Select the recall duration Dial mode Auto clock Register additional handsets Unregister the handsets Network services Restore default settings 31 31 31 31 32 32 32 32 33 33 35 14 Technical data 36 15 Notice 37 Declaration of conformity 37 Use GAP standard compliance 37 Compliance with EMF 37 Disposal of your old product and batteries 37 16 Frequently asked questions 39 17 Appendix 41 Text and number input tables 41 18 Index 43 2 EN 1 Important safety instructions Power requirements ? This product requires an electrical supply of 100-240 volts AC. In case of power failure, the communication can be lost. The voltage on the network is classified as TNV-3 (Telecommunication Network Voltages), as defined in the standard EN 60950. Warning ?? [. . . ] Select [On]/[Off], then press MENU/OK to confirm. The setting is saved. 22 EN Set the battery tone Battery tone is the sound made when the battery is low and needs recharging. 3 Select [On]/[Off], and press MENU/OK to confirm. ECO is displayed in standby mode. Note 1 2 3 Press MENU/OK. Select [Phone setup] > [Sounds] > [Battery tone], then press MENU/OK to confirm. Select [On]/[Off], then press MENU/OK to confirm. When ECO mode is set to [On], the connection range between the handset and the base station can be reduced. Set the sound profile You can set the sound in the earpiece among 3 different profiles. ECO+ mode When the ECO+ mode is activated, it eliminates the radiation of the handset and base station in standby mode. 1 2 3 Press MENU/OK. Select [Phone setup] > [Sounds] > [MySound], then press MENU/OK to confirm. Select a profile, then press MENU/OK to confirm. The setting is saved. 1 2 3 Press MENU/OK. Select [Phone setup] >[ECO+ mode], then press MENU/OK to confirm. Select [On]/[Off], and press MENU/OK to confirm. ECO+ is displayed in standby mode. Note Set the date and time For information, see 'Set the date and time (see 'Set the date and time' on page 9)'. ??Make sure that all the handsets registered to the base ECO mode The ECO mode reduces the transmission power of the handset and base station when you are on a call or when the phone is in standby mode. station are D500/D505 in order to have the ECO+ feature functioning properly. When ECO+ is activated, the standby time is reduced. This is because in ECO+ mode the base station is not transmitting any signal in standby mode; therefore the handset needs to ?listen?more frequently for signals from the base station to detect incoming calls or other requests from the base station. The time it takes for the handset to access features like call setup, call log, paging, and phonebook browsing is also delayed. The handset will not alert you to link loss in case of power loss or moving out of range. 1 2 Press MENU/OK. Select [Phone setup] > [Eco mode], then press MENU/OK to confirm. The following table shows you the current status of the handset screen with different ECO mode and ECO+ mode settings. EN 23 English ECO mode [Off] [Off] ECO+ mode [Off] [On] Handset icon display and are off. is displayed only after the ECO+ mode is activated during standby mode . is displayed and changed to when the ECO+ mode is activated in standby mode. [On] [On] [Off] [On] Name the handset The name of the handset can be up to 14 characters. It is displayed on the handset screen in standby mode. 1 2 3 4 Press MENU/OK. Select [Phone setup] > [Phone name], then press MENU/OK to confirm. [. . . ] ? ? ? Make sure that the base station has power supply. Register the handset to the base station. Move the handset closer to the base station. I have chosen a wrong language which I cannot read, what do I do? 1 2 3 Press to go back to the standby screen. Press MENU/OK to access the main menu screen. Select [Phone setup] > [Language], then you see one of the following texts appear on the screen: English No display ?? [. . . ]