User manual PHILIPS DC1000

[. . . ] Docking Cradle for WACS7000 DC1000 Quick Start Guide A B C Install Connect Enjoy Eng What's in the box Docking cradle 8 x iPod dock adaptor 4 x GoGear dock adaptors DIN Cable RCA Cable Quick Start Guide IMPORTANT! [. . . ] ­ Turn on the power of pipe speakers. Un-install To connect with a different portable player, dismount the iPod first, then pop up the dock adapter and then replace it with a new dock adapter of the matching type. B Connect Connect AC power The DC1000 is powered through WACS7000 by connect it with WACS7000 Center or Station via the 9 pin DIN cable. Center Station Connect audio cable Plug one end of the audio cable to the black 3. 5mm Audio Out jack, and the other end to the audio in jacks on the WACS7000 Center or Station (note that the red terminal should be connected to the red jack). (Audio Out) Center (Audio Out) Station Note: Adjust volume in case playing sound is low after connect your iPod or GoGear with WACS7000! C1 Enjoy When connection is successfully made, power on the WACS7000 Center or Station, then press SOURCE button to switch it to AUX mode, playing will start immediately. You can press the controls on your iPod or GoGear to skip/search for desired track or to stop playing. Besides, you can also use the 2-way remote control that comes with WACS7000 to enjoy your iPod or GoGear with WACS7000. Activating the 2-way remote control Press PORTABLE button Using the 2-way remote control with the docking Note: Only the Volume button, Skip/search button and 2; button will be effective Play Press 2; to start playing · While playing, press 2; to stop playing temporarily. Press 2; again to resume playing. SOURCE SOURCE Adjust volume Press Volume +/­ to increase or reduce volume Skip to the previous or next track · Press to skip to the previous track · Press § to skip to the next track PORTABLE SAME ARTIST DBB PORTABLE SMART EQ SEARCH De-activating the 2-way remote control Press SOURCE, HDD or CD button on the 2-way remote control, the remote control will resume its function with WACS7000 and will no longer be able to control the docking. C2 Enjoy Charging iPod using the docking station When the iPod is properly connected on the docking cradle and the WACS7000 is powered on, battery charging start automatically. Helpful hint: · You can also use a USB cable (not supplied) to connect the docking cradle with your PC to charge your iPod or GoGear Troubleshootting Problem No sound Solution · Check if the audio cable is well connected. · Check if the power cable that connects the DC1000 with WACS7000 is well connected. · Check if the 2-way remote control is at "Portable" mode. Press the Portable button to switch it to Portable mode. · Point the remote control to the docking station. · Once entering Portable mode, the 2-way remote control works with the DC1000. [. . . ] 2006 All rights reserved. www. philips. com [. . . ]