User manual PHILIPS DC177

[. . . ] Docking Entertainment System Register your product and get support at www. philips. com/welcome Philips vous remercie de votre confiance. DC177 Thank you for choosing Philips. Gracias por escoger Philips Need help fast? Read your Quick Use Guide and/or Owner's Manual first for quick tips that make using your Philips product more enjoyable. If you have read your instructions and still need assistance, you may access our online help at Besoin d'une aide rapide? Les Guide d'utilisation rapide et Manuel de l'utilisateur regorgent d'astuces destinées à simplifier l'utilisation de votre produit Philips. Toutefois, si vous ne parvenez pas à résoudre votre probléme, vous pouvez accéder à notre aide en ligne à l'adresse Necesita ayuda inmediata? Lea primero la Guía de uso rápido o el Manual del usuario, en donde encontrará consejos que le ayudarán a disfrutar plenamente de su producto Philips. Si después de leerlo aún necesita ayuda, consulte nuestro servicio de asistencia en línea en www. philips. com/usasupport or call www. philips. com/usasupport ou formez le www. philips. com/usasupport o llame al teléfono 1-888-PHILIPS (744-5477) while with your product. [. . . ] To exit without storing the Plug and Play Press 9 on the system. If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the main supply again. IMPORTANT: Before you operate the system, complete the preparation procedures. Notes: ­ If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" will be displayed. Plug and Play (for tuner installlation) Plug and Play allows you to store all available radio stations automatically. First time setup/power up 1 2 When you turn on the main supply, "AUTO INSTALL - PLEASE PRESS PLAY, STOP CANCEL" is displayed. Press ÉÅ on the system to start installation. "INSTALL" is displayed, followed by "TUNER" and "AUTO". The system will automatically store the radio stations (FM only ) with sufficient signal strength. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played. 15 English Basic Functions English Adjusting volume and sound 1 Turn the VOLUME control anti-clockwise to decrease or clockwise to increase volume on the system (or press VOL -/+ on the remote control). Display shows the volume level VOL and a number from MIN, 1-31, MAX. Press DSC repeatedly to select the desired sound effect: POP / JAZZ / CLASSIC / ROCK. Press DBB (or DBB/LOUD on the remote control) to switch bass enhancement on or off. Display shows if the DBB is activated. 2 3 4 Switching the system on Press STANDBY ON or SOURCE (or 2on the remote control). The system will switch to the last selected source. Press iPod, USB, FM or AUX on the remote control. The system will switch to the selected source. To switch the system to standby mode Press STANDBY ON on the system (or 2on the remote control). The display displays clock time, or --: -- is displayed if clock time is not set. The volume level (up to a maximum volume level of 12 and up to a minimum level of 4), interactive sound settings, last selected source and tuner presets will be retained in the player's memory. To switch the system to Eco-power standby mode Press and hold STANDBY ON (y on the remote control) for more than 2 seconds. The Eco power light will be on. Press and hold DBB/LOUD on the remote control to enable/disable LOUDNESS feature. LOUDNESS feature enables the system to automatically increase the treble and bass sound effect at low volume (the higher the volume, the lower the treble and bass increase). 5 Press MUTE on the remote control to interrupt sound reproduction instantly. Playback will continue without sound. To activate sound reproduction you can: ­ press MUTE again; ­ adjust the volume controls; ­ change source. Power-saving automatic standby The power-saving feature automatically switches to standby 15 minutes after a USB playback has ended and no control is operated. 16 Radio Reception 2 Press PROGRAM on the remote control for more than 2 seconds to activate programming. [. . . ] Failure to follow all requirements can result in delay. WHAT IS NOT COVERED - EXCLUSIONS AND LIMITATIONS: This Limited Warranty applies only to the new products manufactured by or for Philips that can be identified by the trademark, trade name, or logo affixed to it. This Limited Warranty does not apply to any non-Philips hardware product or any software, even if packaged or sold with the product. Non-Philips manufacturers, suppliers, or publishers may provide a separate warranty for their own products packaged with the bundled product. [. . . ]