User manual PHILIPS DC185/37B

[. . . ] · Connect the brown wire to the terminal marked L or coloured red. · Do not connect either wire to the earth terminal in the plug, marked E (or e) or coloured green (or green and yellow). Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not simply over the two wires. Recording and playback of material may require consent. [. . . ] Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. The type plate is located on the bottom of the set. · BASIC OPERATION Switching on the system · Press POWER. TM The system will switch to the last selected source. Switching the system to standby mode · In any source mode, press POWER. TUNER 1 Press SOURCE repeatedly to switch on the radio (FM only). TM Display shows the radio frequency of the last selected waveband. Your preset station is also shown if you are listening to a preset. 3 To select preset stations, press PRESET -/+ once or repeatedly. TUNING TO RADIO STATIONS 1 Press and hold ¡1/2TM until the frequency in the display starts changing. TM After the system tunes to a station of sufficient reception, display shows its frequency. · To tune to a weak station, press ¡1/2 TM briefly and repeatedly until an optimal reception is found. To improve reception (FM): Extend and position the pigtail fully to obtain optimum reception. Manual programming You can store up to 20 FM radio stations in the memory. 1 Tune to your desired station (see TUNING TO RADIO STATIONS). 2 Press MODE to activate the programming, and then press PRESET -/+ to select a desired preset number. 4 Press PRESET -/+ to listen to a preset station. Automatic programming 1 Press and hold MODE for more than two seconds. TMAvailable radio stations will be automatically stored. DOCK By connecting the iPod to your DC185, you can listen to the music stored in iPod player through the powerful speakers of the set. COMPATIBLE PORTABLE PLAYERS · The docking entertainment system is compatible with all the existing Apple iPod models with 30-pin connector: iPod touch (8GB, 16GB), iPod classic (80GB, 160GB), iPod video (30GB, 60GB, 80GB), and iPod nano generation 1 to 3. PLAYING iPod U SING DC185 1 Remove the top cover of dock. 2 Snap the compatible iPod into the dock connector. 3 Press SOURCE repeatedly to switch on the iPod mode. · Make sure that you have powered on Apple iPod before selecting iPod source. [. . . ] To navigate the menu, use the controls on the docked player. - Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product it means the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. [. . . ]