User manual PHILIPS DC190

[. . . ] Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. n Apparatus shall not be exposed to dripping or splashing. o Do not place any sources of danger on the apparatus (e. g. liquid filled objects, lighted candles). [. . . ] g Dock compartment h · i · · / Skip to the previous/next audio file. Start or pause iPod play. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. ___________________________ Connect power Caution · Risk of product damage!Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. When you unplug the AC adaptor, always pull the plug from the socket. · Before connecting the AC adaptor, ensure you have completed all other connections. j TUNING +/· Tune to a radio station. k TIME SET/AUTO SCAN · Set the clock. l WAKE TO iPod/RADIO/BUZZ · Select alarm mode. m MP3-LINK · Jack for an external audio device. o iPod dock · Load an iPod player. Note · The type plate is located on the bottom of the main unit. 1 Connect one end of the AC adaptor to the DC IN socket on the main unit. EN 7 English p VOL +/· Adjust volume. · Adjust time. Switch to standby 1 Press again to switch the unit to standby mode. » The clock (if set) appears on the display panel. Adjust volume 1 During play, press VOL +/- to increase/ 2 Connect the other end of the AC adaptor to the wall outlet. decrease the volume. 4 Play Play from iPod You can enjoy audio from iPod through this unit. Compatible iPod Set clock 1 In standby mode, press and hold TIME SET/AUTO SCAN for 2 seconds. » The hour digits begin to blink. Apple iPod models with a 30-pin dock connector: · iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. 2 3 4 5 6 7 Press TUNING +/- to set the hour. » The minute digits begin to blink. » The week day digits begin to blink. Press TIME SET/AUTO SCAN to confirm. Load the iPod 1 Push to open the dock compartment. Turn on 1 Press . » The unit switches to the last selected source. 8 EN 2 Place the iPod in the dock. 3 5 Listen to radio Note · Only FM radio reception is available on this unit. Tune to a radio station Remove the iPod 1 1 2 Pull the iPod out of the dock. Tip · Position the antenna as far as possible from TV, VCR or other radiation source. Listen to the iPod Ensure that the iPod is loaded correctly. Press SOURCE repeatedly to select iPod source. » The connected iPod plays automatically. · · · To pause/resume play, press . [. . . ] » If the timer is deactivated, or disappears. · 6 Other features Set the alarm timer You can set two alarms which go off at different time. 1 2 Ensure that you have set the clock correctly. Press and hold ALARM 1 or ALARM 2 for 2 seconds. » or and hour digits begin to blink. [. . . ]