User manual PHILIPS DCB3070

[. . . ] Register your product and get support at www. philips. com/welcome DCB3070 EN User manual DE Benutzerhandbuch ES FR Manual del usuario Mode d'emploi 3 23 45 67 IT Manuale utente 89 NL Gebruiksaanwijzing 111 PT Manual do utilizador 133 SV Användarhandbok 153 Important notes for users in the U. K. Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved non-molded plug. If you replace the fuse, use one with: · the ratings shown on the plug, · a BS 1362 approval, and · the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. [. . . ] Insert a disc with the printed side facing outward, and then press to close the disc compartment. If the disc doesn't play, press · To stop play, press . . Switch to standby 1 When the unit is turned on, press to switch the unit to standby. · In standby, press and hold to switch from normal standby to Eco power standby or vice versa. » In normal standby, the clock (if set) appears on the display panel. » In Eco power standby, the backlight on the display panel turns off. Play from USB Note · Make sure that the USB storage device contains playable audio content. 1 2 Connect the USB storage device into the connector on the back panel of this unit. · · · · To select a folder, press . To select an audio file, press To start play, press . / . Pause/resume play 1 During play, press play. to pause/resume 12 EN For CD: are played. 1 1 2 Press / to select another track. · To select a track directly, you can also press a key on the numerical keypad. to select previous/next track For MP3 disc and USB: Program tracks You can program a maximum of 20 tracks. 1 Search within a track 1 2 During play, press and hold Release to resume normal play. / . 2 3 4 5 In CD/USB mode, in the stop position, press PROG/CLOCK SET to activate the program mode. » [PROG] (program) and track number begin to blink. to select an Press / to select a track number, then press PROG/CLOCK SET to confirm. Repeat steps 2 to 3 to program more tracks. » During play, [PROG] (program) is displayed. · To erase the program, in the stop position, press . » [PROG] disappears on the display. Display play information 1 During play, press DISPLAY repeatedly to select different play information. Repeat and shuffle play 1 During play, press MODE/SCAN repeatedly to select a play option. · : the current track is played repeatedly. · : all the tracks are played repeatedly. · : all tracks are played in a random order. [. . . ] To ensure good play quality, clean the disc lens with Philips CD lens cleaner or any commercially available cleaner. Follow the instructions supplied with cleaner. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. [. . . ]