User manual PHILIPS DCB8000

[. . . ] Register your product and get support at www. philips. com/welcome DCB8000 EN User manual DE Benutzerhandbuch FR Mode d'emploi 3 25 51 IT Manuale utente 77 103 125 NO Brukerhåndbok DA Brugervejledning (in standby mode) (in standby mode) Important notes for users in the U. K. Mains fuse This information applies only to products with a UK mains plug. This product is fitted with an approved nonmolded plug. If you replace the fuse, use one with: the ratings shown on the plug, a BS 1362 approval, and the ASTA approval mark. Contact your dealer if you are not sure about what type of fuse to use. [. . . ] Insert two AAA batteries with correct polarity (+/-) as indicated. Push and slide back the battery compartment. 12 EN 4 Get started Caution Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Set clock 1 In the normal standby mode, press and hold CLOCK to activate the clock setting mode. » [CLOCK SET] scrolls on the display panel, and then [CLOCK 24HR] (24hour time format) is displayed with "24" blinking. Press VOL +/- to select [CLOCK 24HR] or [CLOCK 12HR] (12-hour time format), and then press CLOCK WR FRQÀUP » The hour digits begin to blink. Press CLOCK WR FRQÀUP » The minute digits begin to blink. Press CLOCK WR FRQÀUP » The set clock is displayed. Tip To adjust the digits of hour or minute, you can also turn the VOLUME knob on the main unit or press the remote control. / on Eng l i s h Always follow the instructions in this chapter in sequence. 2 Turn on Press . » This product switches to the last selected source. 3 4 5 6 Switch modes Automatically switch the modes: After this product keeps inactive for 15 minutes, it automatically switches to the normal standby mode. After this product keeps in the normal standby mode for 15 minutes, it automatically switches to the eco power standby mode. Manually switch the modes: Press and hold to switch this product: from the working mode or normal standby mode to the eco power standby mode. from the eco power standby mode to the normal standby mode. Press to switch this product between the working mode and a standby mode. Note When an iPod/iPhone/iPad is connected, this product does not switch to the eco-power standby mode. Demonstrate features 1 2 In the normal standby mode, press . [DEMO ON] is displayed, and then feature names scroll on the display panel one by one. To exit the feature demonstration, press again. EN 13 Adjust brightness of display panel Press DIM repeatedly to select different brightness levels. 5 Play Play a disc Caution Turn on or off LED light In the working mode, press and hold DIM to turn on or off the LED light at the bottom of the unit and at the volume knob. Risk of damage to the player!During play, never move the unit. Never put any object other than a disc into the disc compartment. Never look at the laser beam inside the player. Never play discs with accessories such as disc stabilizer rings or disc treatment sheets. CD MP3 / WMA 1 Load a disc. 2) Place a disc onto the disc tray with its label facing up. Press if the play does not start automatically. 2 3 14 EN Buttons Note Philips does not guarantee compatibility with all USB devices. / / MODE RDS/INFO NTFS (New Technology File System) data format is not supported. Actions Start, pause, or resume the play. 6NLS WR WKH SUHYLRXVQH[W ÀOH Press and hold to search backward/forward fast. Select a play mode: normal play, UHSHDW RU VKXIÁH Display the current status and media information. Program audio tracks 1 2 Make sure that the USB storage device contains playable audio contents. » [PRG] blinks on the display panel. Repeat steps 3 and 4 to program more tracks. [. . . ] If the problem remains unsolved, go to the Philips web site (www. philips. com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. Problem Solution No power Make sure that the AC power cord of the unit is connected properly. Make sure that there is power at the AC outlet. [. . . ]