User manual PHILIPS DECT BABY MONITOR SCD589

[. . . ] You can trust this Philips baby monitor to provide round-the-clock support by ensuring you can always hear your baby clearly without any disturbing noise. Your SCD589 uses DECT technology which guarantees zero interference from other wireless appliances and a clear signal between the parent unit and baby unit. It is not a substitute for responsible and proper adult supervision and should not be used as such. Some of the following information may not apply to your particular product; however, when using baby monitor equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1 Read this user manual carefully before using the product and keep it for future reference. [. . . ] 4 Position the baby unit at least 1 meter / 3 feet away from your baby. 5 Position the parent unit at the desired place within the operating range of the baby unit but at least 1 meter / 3 feet away from the baby unit. for more information on the operating range see `Technical specifications'. Briefly press the volume + and ­ buttons (A-4) on the baby unit repeatedly until the desired loudspeaker volume for the baby unit has been reached. Briefly press the volume + and ­ buttons (B-10) on the parent unit repeatedly until the desired loudspeaker volume for the parent unit has been reached. > The displays (A-11, B-8) provide visual feedback on the volume settings of the units: - A: parent unit volume switched off / monitoring baby silently; - P : minimum volume (parent unit and baby unit); - } : maximum volume (parent unit and baby unit). Notes: ­ If you press the Volume + and ­ buttons (A-4, B-10) too long, the volume will not be adjusted. ­ You only need to adjust the baby unit volume when using the talk function (see below). ­ If the volume is set to a high level, the units consume more power. Talking to your baby (Talk function) While using the TALK button (B-1) on the parent unit you can talk to your baby (e. Press and hold the TALK button (B-1) and talk clearly into the microphone (B-5). ⷠRelease the TALK button (B-1) when finished talking. Turn the spindle to the left until it clicks in position. Most functions of your baby monitor can be operated using the local buttons on the units. The functions described below can only be operated remotely using the parent unit menu. The nightlight and lullaby functions can be operated using both menu and local keys. You can set the sound sensitivity of the baby unit to the desired level. When set to the maximum sensitivity level all sounds (including your baby's breathing, when loud enough) can be heard on the parent unit. You can only change the microphone sensitivity if the connection between the baby unit and the parent unit is established (when LINK lights (A-3, B-3) light continuously green). Select the desired sensitivity level for the baby unit microphone, using ­ and + (B-10). ZL = minimum level / lowest sensitivity; ZLLLLL= maximum level / highest sensitivity Note:When the sensitivity level of the baby unit is set to a high level, the unit will consume power because it is in continuous transmission mode. Switching sound alert on and off If sound alert is switched on, the parent unit beeps as soon as the fifth sound level light (B-9) lights orange while the volume is switched off. [. . . ] This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body. for hand held operation , this equipment has been tested and meets the FCC RF exposure guidelines. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. For body worn operation, this product has been tested and meets the FCC RF exposure guideline when used with the belt clip or neck strap supplied with this product. [. . . ]