User manual PHILIPS DECT1112S

[. . . ] In the DECT 111 Duo packs you will also find one additional handset, one charger and 2 additional rechargeable batteries. Wall mounting DECT 111 is suitable for wall mounting. Place vertically the dowels at a distance of 90 mm from each other. Leave a little space (3 mm) between the screw head and the wall. You can now hang the base station on the screws and connect the power supply and line cord. 3 mm 90 mm http://www. philips. com/faqs/dect 3 Installing your DECT 111 Plug the power supply & line cord into the base station If you have a broadband DSL internet Installation, please make sure you have one DSL filter plugged directly on each line socket used in the house and check the modem and the phone are plugged in the correct filter slot (one specific for each) Plug the power supply & line cord into the wall socket. Always use the cables provided in the box. 3 4 Slide open the battery Place the 2 batteries as compartment cover. [. . . ] To redial the last 10 dialled numbers Press the Redial key. Press again this key to see the next number. Or Press the Correction key to exit the list. A long press on the C key deletes the number. To dial from the call log To use the call log function you must first subscribe to the Caller Display (CLI) Service. Your DECT 11stores the numbers of 20 unanswered calls. The symbol on the display informs you of unanswered calls. Use the key to scroll through the list of unanswered calls. Press the Correction key to exit the call log. A long press erase the current entry and the next is shown on the display. Note: the oldest entry is deleted when the memeory is full. http://www. philips. com/faqs/dect 9 To delete all the call log at once Press the Programming key. To mute the handset During a call: Press the Correction key. The call is put on hold and the other party no longer hears you. Press again the Correction key to end mute. To program & use key 1 Some network provider offer a voice mailbox service, as an answering machine. To access directly this voice mailbox, program Key 1 as a short cut to the feature. Enter your 4-digit PIN code (default is 0000). Enter the phone number (of your network voice mailbox). Press the Programming key to save the number. From now press key 1 to listen to the messages on your network voice mailbox. 10 http://www. philips. com/faqs/dect To activate/deactivate the Baby call With Baby call you can save an emergency number that can be dialled by a press on ANY key (except the programming key). Press the Programming key to save the setting. When activated, the baby call number is displayed. [. . . ] Press the Programming key to save the setting To activate/deactivate the keypad lock Long press on # key to activate the keypad lock. The display shows . Long press on # key to unlock the keypad. Note:When the keypad is locked you cannot make calls but you can still answer a call. 14 http://www. philips. com/faqs/dect Please contact : www. philips. com/support PROBLEMS - No dialling tone when pressing . Troubleshooting CAUSES SOLUTIONS - The base station is not properly connected to electricity or to the telephone sockets. - icon is blinking. - Check the connections. (p 4). [. . . ]