User manual PHILIPS DECT2114S

[. . . ] Scroll to , scroll to Handset Date & time and select. To set the date and time Press press Press Scroll to to select Set date and enter the current date, press OK to enter the carousel. to select Handset ring tones to select External ring tones your 1 http://www. philips. com/faqs/dect OK. Scroll to Set time and enter the current time, To set the handset ring tone Press Press browse through the list to hear the ring tones and select ring tone Quick start guide Pilot key Press to enter the carousel or validate a choice - Scroll to navigate in the menus & options - Move the cursor right/left -Scroll up to reach the Call log from idle mode - Scroll down to reach the Phonebook from idle mode Long press to unlock the keypad DECT 311 Handset Earpiece Talk To take the line, answer a call or hang up Clear/Recall - To correct a digit when predialling or a character when editing - Short press to go back one menu when navigating - Long press to return to idle mode when navigating - To insert R for operator services when on line Loudspeaker Press to take the line or activate the handset loudspeaker during a call Keypad lock - Short press to insert * - Long press to lock/unlock the keypad in idle mode - Long press to insert R (inbetween digit pause) when predialling Do Not Disturb & case mode - Short press to insert # when dialling - Short press to switch case mode when editing - Long press to activate/deactivate the "Do Not Disturb" mode - Long press to insert a pause (P) when dialling SMS key - Short press to reach Send new SMS menu from idle mode - Short press from the Phonebook or the Call log to edit an SMS Microphone Alarm clock - Short press to dial 0 - Long press to activate/deactivate the alarm clock Call transfer/Intercom - Short press to initiate or cancel internal call - Short press to answer an internal call - Short press during internal call to transfer the call or toggle between internal call and external call 2 http://www. philips. com/faqs/dect DECT 311 Handset Icons on handset display On first use, it may be necessary to wait for a few minutes of charge before seeing symbols on the display. When charging, the battery bars scroll from empty to full status. [. . . ] See FAQ. p. 39. Display contrast To set the display contrast Press to enter the carousel menu Scroll to Handset and select Scroll to Display contrast and select Browse through the levels and select Screen-saver After 2 minutes of inactivity, the screen saver is displayed (See p. 8) You can deactivate it. To activate or deactivate the screen-saver Press to enter the carousel menu Scroll to Handset and select Scroll to Screen-saver and select Press to select ON or scroll to OFF and select Handset http://www. philips. com/faqs/dect 19 Intercom ! Intercom menu is accessible via the carousel or This feature allows you to make free internal calls, transfer internal calls from one handset to another or use the conference option (DECT 3112 only). It also enables you to use the babysit feature (room monitoring). Internal call Press to call the other handset (s) To call a particular handset, press Hang up Note: If the handset does not belong to the Philips DECT 311 range, this function may not be available. + handset number (for example ) Fast call transfer when on line During a call you can transfer the call without waiting for the other handset to pick up. Press to call the other handset Hang up Note:The person on hold hears music. A press on allows you to switch between the 2 calls (Switch). Call transfer to a specific handset when on line During a call you can transfer the call to a specific handset. Press + handset number (for example Hang up Note:The person on hold hears music. A press on 20 http://www. philips. com/faqs/dect to call the selected handset allows you to switch between the 2 calls (Switch). Intercom Call transfer via the in-call options During a call you can transfer the call via the in-call options. Press to enter the options (with handset 1) Scroll to Intercom and select If there is only one additional handset, it rings automatically. Otherwise : Select from the handsets list the handset you want to call and select The called handset rings (handset 2). The external call is put on hold. If there is no answer from the called handset you can resume the call on the first handset. Example of services : Call forward To activate call forward Press to enter the carousel menu Scroll to Operator services and select Press to select Call forward Enter the number to which the calls are to be forwarded and press OK The number is automatically chained to the call forward prefix and the system dials Hang up From now on the calls will be redirected to the assigned phone number. To deactivate call forward Press to select Press to select Hang up View Cancel Operator services http://www. philips. com/faqs/dect 29 Extra Call duration Alarm clock "Do not disturb" Call duration To view the time Press to enter the carousel menu Scroll to Extra and select Press to select Call duration The total time of communications is displayed Press to Reset the counter The alarm clock To activate/deactivate the alarm clock A long press on activates/deactivates the alarm clock with your own settings. To set the alarm clock Press to enter the carousel menu Scroll to Extra and select Scroll to Alarm clock and select Scroll to Set day and select a day OK Scroll to Set time , enter the time and press When the alarm rings, press any key to stop it. The snooze is then activated (will ring every 5 mn). To definitely stop it, press 30 http://www. philips. com/faqs/dect Extra To set the alarm ringer type Press to enter the carousel menu Scroll to Extra and select Scroll to Alarm clock and select Scroll to Settings and select Press to select Ring tones The current ringer is heard Browse through the list and select To set the alarm ringer volume Press to enter the carousel menu Scroll to Extra and select Scroll to Alarm clock and select Scroll to Settings and select Scroll to Ring tone Volume and select The current volume is heard Browse through the levels and select Extra http://www. philips. com/faqs/dect 31 "Do not disturb" mode This feature allows you to screen calls after a certain time in the evening when you do not want to be disturbed. Enter the time and select the group(s) allowed to call you. If the caller does not belong to an allowed group the handset will remain silent, while he will hear ringing. The operator voice mailbox (if any) will answer the call. A subscription to the Caller Display (CLI) service is needed. To activate/deactivate "Do not disturb" mode A long press on settings. activates/deactivates the "Do not disturb" mode with your own To set the "Do not disturb" mode Press to enter the carousel menu Scroll to Extra and select Scroll to Do not disturb and select Scroll to Set day, enter the day or period of time Scroll to Start time, enter the time and press Scroll to Stop time, enter the time and press OK OK Scroll to Allowed caller choice, activate the callers group's allowed to call you and select Warning !Only allowed callers will be able to reach you during the selected day & time. If no group is selected but the feature is activated, then nobody will be able to reach you. 32 http://www. philips. com/faqs/dect Extra Sounds Handset ring tones Group ring tones Handset ring tone volume Settings Handset ring tones To set the handset ring tone You can set the ring tone heard on the handset when receiving a call. Press to enter the carousel Scroll to Sounds and select Press to select Handset ring tones Press to select External ring tones Browse through the list to hear the ring tones Press to select your ring tone To set the handset ring tone You can set the ring tone heard on the handset when receiving an internal call. [. . . ] Remember that it only works with alphanumeric display. All items of telephone equipment have Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any one telephone line. A total REN of 4 is allowed, if the total REN of 4 is exceeded, the telephones may not ring. With different telephone types there is no guarantee of ringing, even when the REN is less than 4. [. . . ]