User manual PHILIPS DECT2212S

[. . . ] An alternative should be made available for access to emergency calls. Power requirements: The product requires an electrical supply of 220-240 volts, single phase alternating current, excluding IT installations defined in standard EN 60950. Battery requirements: The handset requires power source of two rechargeable NiMH batteries, size AAA 1. 2V 650mAh (HR10/44). The electrical network is classified as dangerous according to criteria in the standard EN 60950. [. . . ] Personalizing your phone will be done in the various menu items. At any time, you can press the EXIT key to exit the current menu or cancel the confirmation. If you press and hold the EXIT key, the phone will simply abort all programming and return to standby. Personalizing your phone's display Giving your phone a name You can give your phone a different name. If you have more than one handset, you can give each handset its own name. The handset name can be up to 8 characters long and it can be composed of A-Z, 0-9, and space. Press DELETE key if you want to delete the current name and use the number keys to enter a new name. Press the OK key to confirm. Setting your phone's language Your phone comes with several languages. When you change your phone's language, the menus and prompts will be displayed in the chosen language. Press the OK key to confirm. Turning the backlight on/off Your phone screen will be lit when the phone is being used. Press the OK key to confirm. PERSONALIZING YOUR PHONE 17 www. philips. com/faqs/dect Personalizing your sounds You can assign different ringing melodies for each handset at different volume levels. Selecting your handset's ringing melody 1. The current melody is displayed and played. Press the OK key to confirm. Selecting your handset's ringing volume 1. The current level is displayed and played. Press the OK key to confirm your selection. Warning: We strongly advise to put the handset far from your ear when it is ringing. Turning off your handset's ringer appears to indicate that the ringer is turned off. Ringer does not emit any sound to indicate an incoming call. Turning the key tone on/off Key tones are tones that your phone makes each time you press a key on the handset. Press the OK key to confirm. 18 www. philips. com/faqs/dect PERSONALIZING YOUR PHONE 8 Advanced features Note: Your handset must have a link with the base unit in order to use any advanced features mentioned in this section. Dial mode * Your phone is set to tone dialling. You can switch to pulse dialling if necessary. Press the OK key to confirm. Temporary tone dialling in pulse dial mode If the dialling mode is set to pulse, after taking the line you can press and hold the STAR key to set temporary tone dialling. All the following digits will be dialled as tones until you hang up. Recall duration * Your phone comes with 2 factory programmed recall durations. Check with your local service provider if you are not sure which duration to use. 1. Press the OK key to confirm. Note: This setting is useful when using operator services. The use of some services accessed with R key +1, R key+2, Key+3 (call waiting, call forward. . . ) will depend on the recall setting. *Country dependent ADVANCED FEATURES 19 www. philips. com/faqs/dect 9 Registering a handset System You can register up to 4 handsets to your DECT 221 base station and up to 5 handsets to your DECT 225 base station. [. . . ] · · · There is no dial tone. · · · · · The second call (Call Waiting) cannot be answered. The empty battery icon appears soon after the batteries are charged. The handset is unable to register (DECT 221 only) · · · · Make sure that the adapter and the phone cord are connected properly. [. . . ]