User manual PHILIPS DLA 44000

[. . . ] Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Your Philips TransDock micro also features a unique dial-based interface that provides a simple and intuitive way to adjust your FM transmitter's settings and frequencies. Your Philips TransDock micro also comes with the ability to set preset stations for the frequencies you use most. [. . . ] Then, turn the dial to scroll through the various Settings, and press the dial to enter your desired Setting. Turn the dial to the right or left to view the chosen Settings options, and press the dial to confirm your selection. Once you've made your selection, you will return to the Settings Menu. press the center button to exit the Settings Menu. D Note: Your Philips TransDock micro will automatically exit the Settings Menu after a few seconds of inactivity. Next, scroll to and select the preset number (SET 1, SET 2, SET 3, or SET 4) and press to select. D Note: Your new preset will override the preset that was last saved, including the default presets. Preset Mode gives you the option to scroll through your presets in Manual Mode. To turn Preset Mode on, follow these simple steps: Now you can scroll through the four presets (P1, P2, P3, P4) in Manual Mode. Leave your Philips TransDock micro on the desired preset and tune your radio to the corresponding frequency to begin broadcasting. Turn the dial right for higher intensity and left for lower intensity or completely off. Audio Level gives you the option of selecting the volume output level that fits your particular audio. Turn the dial right or left to select from: Low, Medium or High. Listening Mode allows you to choose between Mono and Stereo. your Philips TransDock micro defaults to Mono for optimal transmitter performance. To learn more about Listening Mode please read Getting the Best Sound Quality. Reset Settings allows you to revert back to the factory settings. to do so , press the dial when on Reset Settings. Your Philips TransDock micro will ask you if you are sure you would like to reset your settings. Press the dial once to accept, or turn right or left to return to the Settings Menu. Brightness Time allows you to change the length of time that your Philips TransDock micro's display screen stays active. Scroll through to select: Always On, 2 seconds, 5 seconds, 10 seconds, 15 seconds, or 20 seconds To adjust brightness, turn the dial right for higher intensity and left for lower intensity. [. . . ] Försök ställa in en stark station, och sedan gå bakåt två frekvenser - till exempel 103, 5 till 103, 1. Med din Philips TransDock micro inställningstavla, gå till den station du vill spara ­ vridandes till höger för högre stationer och till vänster för att ställa in lägre stationer. Vrid inställningstavlan till höger för högre intensitet och till vänster för lägre intensitet eller för att helt stänga av. Tryck på inställningstavlan en gång för att bekräfta, eller till höger eller vänster för att återgå till inställningsmenyn. [. . . ]