User manual PHILIPS DLA97878

[. . . ] · Keep way from sunlight to prevent heat build-up. · Keep away from high voltage devices. Take the package to your local recycling center. 4 · Four programmable presets · Monaural and stereo listening modes 5 ENGLISH What's in the box Included 1. [. . . ] Your Philips TransDock micro will turn on and off automatically with your car. Tips for manually finding an empty station: · Be sure to search the entire spectrum of FM frequencies. · When using scan/seek on your car's radio, if your tuner stops on 101 and then jumps to 103, look in the 102 frequencies for empty stations. Turning your Philips TransDock micro on and off To manually turn your Philips TransDock micro on or off while your car power is on, press and hold the dial for approximately 5 seconds. Preset Store allows you to save up to four preset stations. The default presets are 88. 1, 94. 9, 100. 9, and 107. 9. Finding empty radio frequencies using IntelliTune 1. Press the dial on your Philips TransDock micro. This will activate the IntelliTune search. While it is searching, the word IntelliTune will appear on your TransDock micro's display. Once IntelliTune finds an empty frequency, it will display "Tune Radio to XXX. X". Then, tune your FM radio to that station and begin enjoying your iPod music over your car stereo. To find an empty frequency using IntelliTune: · Try tuning to a strong station, then backing down two frequencies - for example 103. 5 to 103. 1. You can often find empty frequencies this way. D Note: If that frequency is taken, scan to the next station and try again. 3. Plug the Connector Cable into the iPod dock connector. 4. To activate your Philips TransDock micro's IntelliTune feature, press the dial. Your Philips TransDock micro will display the word IntelliTune as it searches for the optimal frequency. This should only take a few seconds. Once the search is complete, the display will instruct you to tune your radio to the frequency found by IntelliTune. Match the FM station on your radio with the corresponding FM frequency shown on your TransDock micro's display. Click Play on your iPod to enjoy your music over your car's FM radio. Manually finding empty radio frequencies 8 Your Philips TransDock micro also allows you to manually tune the transmitter to desired FM frequencies. Turn your Philips TransDock micro dial to the right to tune to higher stations and left to tune to lower stations. To enter the Settings Menu press and hold the your Philips TransDock micro dial until the display flashes "Settings". Then, turn the dial to scroll through the various Settings, and press the dial to enter your desired Setting. Turn the dial to the right or left to view the chosen Settings options, and press the dial to confirm your selection. Once you've made your selection, you will return to the Settings Menu. Press the center button to exit the Settings Menu. D Note: Your Philips TransDock micro will automatically exit the Settings Menu after a few seconds of inactivity. Settings and features 4. Repeat steps 1-3 to store the remaining presets. D Note: Your new preset will override the preset that was last saved, including the default presets. 3. Once in the Settings Menu, scroll to Preset Store and press the dial to select. Next, scroll to and select the preset number (SET 1, SET 2, SET 3, or SET 4) and press to select. 2. Press and hold the dial to enter the Settings Menu. 1. Using the dial, tune Philips TransDock micro to the station you'd like to set ­ turning right to tune to higher stations and left to tune to lower stations. To store your own preset stations, follow these simple steps: Preset Mode Preset Mode gives you the option to scroll through your presets in Manual Mode. [. . . ] THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. Philips' liability is limited to repair or, at its sole option, replacement of the product. Incidental, special and consequential damages are disclaimed where permitted by law. This warranty gives you specific legal rights. [. . . ]