User manual PHILIPS DS1400

[. . . ] Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. [. . . ] If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. ___________________________ Turn on In standby mode, the docking speaker turns on automatically when it detects an audio signal from docked iPod/iPhone. Switch to standby mode The unit switches to standby mode if there is no audio signal from docked iPod/iPhone over 15 minutes. Connect power Caution supply voltage corresponds to the voltage printed on the back of the unit. When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •• Risk of product damage!Make sure that the power Note •• Before connecting the AC adaptor, make sure that you have completed all other connections. 4 EN 4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this docking speaker. To remove the iPod/iPhone: • Pull your iPod/iPhone out of the dock. Compatible iPod/iPhone The docking speaker supports the following iPod/iPhone models. Made for: • iPhone 5 • iPod nano (7th generation) • iPod touch (5th generation) Listen to the iPod/iPhone Note •• Make sure that the iPod/iPhone is loaded correctly. Load the iPod/iPhone Start to play music from your iPod/iPhone. »» Music streams from the docking speaker automatically. 1 Insert your iPod/iPhone into the dock. Charge the iPod/iPhone The docked iPod/iPhone begins to charge automatically after connected to power. Charge your mobile phone 2 3 4 For the first-time use, you will be asked to install an app on your iPod/iPhone. Tap [Yes] (yes)to accept the installation request. Follow the on-screen instructions to complete the installation. »» The docking speaker synchronizes time and date from the docked iPod/iPhone. • You also can press TIME/DATE repeatedly to switch between 12/24 hour and month/date format. You can charge your mobile phone through the USB socket in this device with a USB cable (not supplied). Adjust volume During play, press +/- repeatedly to increase or decrease the volume. Adjust brightness Press repeatedly to select different levels of display and bottom brightness. EN 5 5 Product information Note •• Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Signal to Noise Ratio 2 x 2 W RMS 60 dBA General information AC/DC switching adaptor Model: S018KB0590240 (Philips) Input: 100-240 V~, 50/60 Hz, 500 mA; Output: 5. 9 V 2400 mA; 18 W ≤500 mA 143 x 134 x 97 mm 0. 78 kg Operation Power Consumption USB charging Dimensions: Main Unit (W x H x D) Weight: Main Unit 6 EN 6 Troubleshooting Warning •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. [. . . ] Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. [. . . ]