User manual PHILIPS DTR320

[. . . ] NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 1 NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 2 Welcome to digital television Congratulations on choosing the PHILIPS DTR 320 digital terrestrial receiver, which will allow you to access Freeview digital terrestrial television, radio and interactive channels. With this product, you can enjoy advanced functions and features including: - Award-winning noise-free reception - Automatic programme installation - Wide screen format - TV SCART and VCR/DVD SCART connectors - Personal channel list and favourite lists - Electronic Programme Guide PHILIPS have made every effort to ensure this product meets your every day needs for years to come. This User Manual covers the installation of your receiver, together with explanations of the standard and unique features of the product. English Lucas Covers Paris, March 2005 Meaning of symbols Important information: Must be read and understood. [. . . ] - Scroll to the setting you want to change. The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the available values: · Video Output: CVBS-PAL, or Y/C. CVBSPAL is the default and recommended setting. · Easy Record: select the control method that suits your VCR. English 5. 2. 3. 5 Volume This item is used to select the volume level at start-up. - Press the ibutton to change the level setting. - Press t or y to modify the volume level. 5. 2. 3. 6 Remote Control This item is used to set the remote control address. - Press the ibutton to access the available values. - Move to the address you want to select. - Press <OK> to confirm your selection. - Proceed as described in paragraph 7. 1. If you do not complete the procedure as described in paragraph 7. 1, you will not be able to control your receiver using your remote control. 5. 2. 3. 3 Digital audio output Select AC3 (digital audio 5. 1) only if your receiver is connected to a Dolby Digital home entertainment system. For recordings, AC3 will be switched off automatically. 5. 2. 3. 4 Channel Banner This item is used to select the channel banner display duration and transparency. - Scroll to the setting you want to change. The corresponding values are displayed on the right-hand side of the screen. - Press the ibutton to access the available values. CHANGING THE SETTINGS OF YOUR RECEIVER 19 NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 20 5. 3 Installation - Press the <MENU> button to open the main menu. - Press the y button to select Installation. - Press the ibutton to access the Installation sub-menu. To uninstall a service you have selected from the installed services list: - Press the red colour button. The service is removed from the installed service list and appears in the uninstalled services list. To install a service you have selected from the uninstalled services list: - Scroll to the position where you want to install the service. [. . . ] Your aerial may have been moved, for example by severe weather. Your aerial connection has become loose or disconnected. This normally is only a temporary situation and should correct itself. Check signal quality and if necessary realign your aerial. Check all aerial connections and make sure they are all firmly pushed into sockets. TROUBLESHOOTING GUIDE 29 NOTICE DTR 320_290405. qxd 29/04/05 14:07 Page 30 Problem English You cannot select all of the channels and the P+/- or Arrow up/down buttons do not always work. [. . . ]