User manual PHILIPS DVD-VCR HOME THEATER SYSTEM MX5100VR-37B

[. . . ] Return your Product Registration Card today to get the very most from your purchase. Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once to ensure: Returning the enclosed card guarantees that your date of purchase will be on file, so no additional paperwork will be required from you to obtain warranty service. By registering your product, you'll receive notification - directly from the manufacturer - in the rare case of a product recall or safety defect. [. . . ] Press VCR, then play, fast forward, or rewind a tape to the location that you would like to refer to later. When you later want to return to this point on the tape, press DISPLAY so you can see the counter (while tape play is stopped). When it reaches zero, press PLAY B to play the tape. You may only set the counter to zero at one location at a time. Follow the steps below to search forward or backward on a tape a specific length of time. Press VCR, then press SEARCH MODE until the TIME SEARCH screen appears. Within 30 seconds, press o or p until your desired length of time appears. or , press and hold o or p until you reach the desired length of time. You can set a Time Search for up to 9 hours and 59 minutes (9:59). Within 30 seconds, press s (for a reverse search) or B (for a forward search). the VCR begins rewinding or fast forwarding the tape. The time will count down beneath TIME SEARCH during the search. If the end of the tape is reached during the search, the search will stop and the tape may rewind. An Index Mark is made automatically at the beginning of each recording. Press VCR, then press SEARCH MODE until the INDEX SEARCH screen appears. Within 30 seconds, press o or p until the number of programs you want to skip appears beneath INDEX SEARCH. Within 30 seconds, press s (for a reverse search) or B (for a forward search). when the tape finishes rewinding or forwarding , playback will start. The program numbers will count down beneath INDEX SEARCH during the search. If the end of the tape is reached during the search, the search will stop and the tape may rewind. Recordings should be at least one minute long in SP speed, two minutes in LP, and three minutes in SLP. Otherwise, the Index Mark will not be available. [. . . ] Press STOP/EJECT C A on the System three to five times. If the tape still does not eject, you may need to have an authorized servicer remove the tape. If you accidentally enter Line Input mode (L1 or L2 will appear on your TV screen briefly), press SKIP i/CH o or SKIP j/CH p or the Number buttons to select another channel. hi-Fi Stereo Sound · During playback, Hi-Fi audio may normally revert to normal audio when you adjust tracking. [. . . ]