User manual PHILIPS DVD616K-931

[. . . ] General Information Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not playback, and should be unloaded. Laser safety This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. 3 4 The region code for Singapore is 3. [. . . ] NOTE: Please set the option DOWNMIX to LT/RT, VSS or STEREO before switching on Karaoke function. 5 6 7 General setup of karaoke function Press MODE to display karaoke menu (Karaoke menu will disappear if you do not press any key in a minute). Note: Keeping highlight cursor on RECORD option will allow you to record by pressing 3 , and 4 to quit. otherwise pressing 3 or 4 will get slow motion effect. KEY CONTROL 1 2 Press 1 2 to highlight the option KEY. Press 3 4 to adjust the pitch to adopt your voice. 15 DVD616K IFU for /751 3141 016 18911 Setup Menu Basic operations 1 2 3 4 5 RETURN DISPLAY Press SYSTEM MENU in the STOP mode to enter the Setup Menu. Press the OK key to open the next level submenu or confirm your selection. Press the 1 2 keys to enter the submenu or return to the previous menu. Press the 34 keys to highlight the preferred menu. Press SYSTEM MENU to quit the setup menu. When you quit the setup menu, the settings will be stored in the player's memory even if the player is switched to power off. DISC MENU TITLE 0 1 2 SYSTEM MENU OK 3 1 2 3 1 2 1 2 3 Program (not available for DVD discs) To choose the PROGRAM item, press the 34 keys. Press the 2 key to move the cursor to the field of the submenu to choose the item ON. Press OK to enter the program page. Input your favorite track Enter a valid track number by pressing the numerical keys. Press the 1 234 keys to move the cursor to the next selected position. Repeat the steps above to enter another track number until the whole program is completed. Exclude a track Press the 1 234 keys to move the cursor to track you want to exclude. Input an invalid track number to cancel this track. Cancel all tracks Press the 1 234 keys to move the cursor to the CLEAR button. Now you can input your favorite tracks again. Press ¡1 or 2TM to program more tracks. Playback tracks When programing is completed, Press the 1 234 keys to move the cursor to the PROG button. DVD player will playback the selected program under the programed sequence. General setup menu Some settings are needed in this menu. they are: DISC LOCK, PROGRAM, VFD DIM, OSD LANGUAGE and SCREEN SAVER. Follow the steps below: Press the SYSTEM MENU key to enter the setup menu. Press the 34 keys to choose the GENERAL SETUP menu. [. . . ] Press the 3 4 to highlight the SMART NAV menu. Press 3 4 to highlight the NO MENU or WITH MENU item. NO MENU: playback all images or MP3 musics in sequence automatically WITH MENU:playback images or MP3 musics in the selected folder. Press the OK key to confirm your selection 22 DVD616K IFU for /751 3141 016 18911 Specifications PLAYBACK SYSTEM DVD Video Video CD & SVCD CD (CD-Recordable and CD-Rewritable) Picture CD MP3 CD CD-R, CD-RW DVD-R, DVD+RW AUDIO PERFORMANCE DA Converter 24bit Signal-Noise (1KHz) 90dB Dynamic range(1KHz) 80dB DVD fs 96 kHz 4Hz- 44kHz fs 48 kHz 4Hz-22kHz SVCD fs 48 KHz 4Hz-22kHz fs 44. 1 kHz 4Hz-20kHz VCD/CD fs 44. 1 kHz 4Hz- 20 KHz VIDEO PERFORMANCE * CVBS * S-VIDEO * YUV 1Vpp --- 75 Y: 1. 00Vpp --- 75 C: 0. 30Vpp --- 75 Y: 1. 00Vpp --- 75 CR: 0. 7Vpp --- 75 CB: 0. 7Vpp --- 75 TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback 625 Multistandard 525 (PAL/NTSC) CONNECTIONS YUV Video Output S-Video Output Video Output Audio Output(L+R) Digital Output Cinch Mini DIN 4-pins Cinch Cinch 1 coaxial / optical IEC958 for CDDA / LPCM/ MPEG1 IEC1937 for MPEG 2, Dolby Digital and DTS AUDIO FORMAT Digital Mpeg/ AC-3/ DTS PCM MP3(ISO 9660) compressed Digital 16, 20, 24 bits fs, 44. 1, 48, 96 kHz 24, 32, 56, 64, 96, 128, 256 kbps & variable bit rate fs, 16, 22. 05, 24, 32, 44. 1, 48 kHz CABINET Dimensions (w x d x h) Weight 435 x 235 x 71 mm Approximately 2. 5 Kg Analog Sound Stereo Dolby Digital multichannel surrond sound downmix 2 channels. Specifications subject to change without prior notice Maintenance Cleaning the Cabinet ¶ Use a soft cloth slightly moistened with a mild detergent solution. [. . . ]