User manual PHILIPS DVD701-172

[. . . ] See `Connecting to Optional Equipment'. Caution: ­ Make sure the DVD player is connected directly to the TV. Set the TV to the correct video input channel. [. . . ] ­ Do not connect the player's audio out jack to the phono in jack of your audio system. ­ Do not connect your DVD-player via your VCR. The DVD image could be distorted by the copy protection system. Connecting to an amplifier equipped with two channel analog stereo or Dolby Surround 1 Connect the Left and Right AUDIO OUT jacks of the DVD player to the audio left and right in jacks on your amplifier, receiver or stereo system, using the supplied audio cable (A). Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an A/V receiver equipped with a multi-channel decoder (Dolby DigitalTM, MPEG 2 and DTS) 1 Connect the player's digital audio out jack (optical G or 2 coaxial F) to the corresponding in jack on your amplifier. Use an optional digital (optical G or coaxial F) audio cable. You will need to activate the player's digital output (see `Personal Preferences'). Digital Multi-channel sound Digital multi-channel connection provides the best sound quality. For this you need a multi-channel A/V receiver that supports one or more of the audio formats supported by your DVD player (MPEG 2, Dolby DigitalTM and DTS). Check the receiver manual and the logos on the front of the receiver. Connecting to a TV ¶ Make one of the following connections, depending on the capabilities of your existing equipment. Always point the remote control directly at the player, making sure there are no obstructions in the path of the infrared beam. Corresponding keys on the front panel of the player can also be used. 1 Unplug the DVD player from the mains. 2 Press and hold 9 and T, on the front of the DVD player. While holding 9 and T, plug in the mains. Menu bar operation ¶ ¶ ¶ ¶ A number of operations can be carried out via the menu bar on the screen. The menu bar can be accessed by pressing the cursor keys on the remote control. Pressing SYSTEM MENU while the menu bar is displayed will clear the menu bar from the screen. The selected item will be highlighted and the appropriate cursor keys to operate will be displayed below the icon. The symbols < or > indicate more items are available at the left/right of the menu bar. Press 1 or 2 to select these items. 3 After PAL or NTSC appears on the display of the DVD player, release 9 and T at the same time. [. . . ] Press 1 or 2 to select these items. 3 After PAL or NTSC appears on the display of the DVD player, release 9 and T at the same time. The PAL or NTSC indicator that appears on the display indicates the current setting. To change the setting, press T within three seconds. [. . . ]