User manual PHILIPS DVD736K-751

[. . . ] 1 DVD 736K/931 Chinese IFU " « 1 2001. 1. 22, 1:40 PM General Information Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not playback, and should be unloaded. Laser safety This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. [. . . ] Now you can input your favorite tracks again. Playback tracks When programing is completed, Press the 1 234 keys to move the cursor to the PROG button. DVD player will playback the selected program under the programed sequence. Stop the program playback At the PROGRAM page, When programing is completed, Press the 1 234 keys to move the cursor to the QUIT button. Press the OK key to quit this menu. General setup menu Some settings are needed in this menu. they are: DISC LOCK, PROGRAM, OSD LANGUAGE and SCREEN SAVER. Follow the steps below: Press the SYSTEM MENU key to enter the setup menu. Press the 34 keys to choose the GENERAL SETUP menu. Press the OK key to confirm selection. 1 2 3 Disc lock When the disc is locked, the player will store its typical code into the memory for the future identification. For the next playback, the DVD player will prompt to enter the password. 1 Press the 34 keys to highlight the DISC LOCK item in the GENERAL SETUP menu. 3 Enter its submenu by pressing the 2 key. 4 Press the 1 key to return to the GENERAL SETUP menu. When playback a locked disc, the DVD player will prompt to enter your password or 3308 (default) password. To change the password , refer to the option PASSWORD in the PREFERENCES menu . 1 2 VFD Dim 1 2 3 This function is used to adjust the brightness of VFD on the front panel. Press the 34 keys to highlight VFD DIM in the GENERAL SETUP menu. Enter its submenu by pressing the 2 key. 16 DVD 736K/691 English IFU " « 16 DVD736K IFU for /751 10:32 AM 3141 016 19191 2001. 1. 31, Setup Menu 4 Move the cursor by pressing the 34 keys to highlight the selected item. 100: make the VFD brighter than normal. 70: standard brightness 40: make the VFD dimness. Press the 1 key to return to the GENERAL SETUP menu. REDIR, which gives the setup system to reproduce high quality surround sound. Press the 34 keys to highlight the SPEAKER SETUP item. [. . . ] Press 3 4 to highlight the NO MENU or WITH MENU item. NO MENU: playback all images or MP3 musics in sequence automatically WITH MENU:playback images or MP3 musics in the selected folder. Press the OK key to confirm your selection DVD 736K/691 English IFU " « 23 2001. 1. 31, 10:33 AM Specifications PLAYBACK SYSTEM DVD Video Video CD & SVCD CD (CD-Recordable and CD-Rewritable) PICTURE CD MP3-CD CD-R, CD-RW DVD+RW AUDIO PERFORMANCE DA Converter 24bit Signal-Noise (1KHz) 100dB Dynamic range(1KHz) >80dB DVD fs 96 kHz 4Hz- 22kHz fs 48 kHz 4Hz- 22kHz SVCD fs 48 kHz 4Hz- 22 KHz fs 44. 1kHz 4Hz- 20kHz CD/VCD fs 44. 1kHz 4Hz- 22kHz VIDEO PERFORMANCE * CVBS * S-VIDEO 1Vpp --- 75 Y: 1. 00Vpp --- 75 C: 0. 30Vpp --- 75 * Component video Output Y: 1. 00Vpp --- 75 CR: 0. 7Vpp --- 75 CB: 0. 7Vpp --- 75 TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines Playback 625 Multistandard 525 (PAL/NTSC) CONNECTIONS Component Video Output Cinch S-Video Output Mini DIN 4-pins Video Output Cinch Audio Output(5. 1) Cinch Audio Output(L+R) Cinch Digital Output 1 coaxial / optical IEC958 for CDDA / LPCM/ MPEG1 IEC1937 for MPEG 2, Dolby Digital and DTS AUDIO FORMAT Digital Mpeg/ AC-3/ DTS PCM MP3(ISO 9660) compressed Digital 16, 20, 24 bits fs, 44. 1, 48, 96 kHz 24, 32, 56, 64, 96, 128, 256 kbps & variable bit rate fs, 16, 22. 05, 24, 32, 44. 1, 48 kHz Analog Sound Stereo Full decoding of Dolby Digital and DTS multichannel surrond sound CABINET Dimensions (w x d x h) Weight 435 x 286 x 75 mm Approximately 3. 0 Kg Specifications subject to change without prior notice Maintenance Cleaning the Cabinet ¶ Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasives. [. . . ]