User manual PHILIPS DVD750-005

[. . . ] Return your Warranty Registration Card within 10 days. Return your Warranty Registration card today to ensure you receive all the benefits you're entitled to. Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a PHILIPS product. So complete and return the Warranty Registration Card enclosed with your purchase at once. [. . . ] If the incorrect information appears, select the number you want to change using s. Then, enter the correct numbers using o or p. The DVD/VCR will turn off and the red RECORD TIMER light will appear on the front of the DVD/VCR. in some cases , the DVD/VCR will switch to DVD mode instead. You may use the DVD Player during a timer recording. If you want to use the VCR until time for the recording, don't press TIMER SET until a few minutes before the recording should start. Or, press TIMER SET only when you know you won't be using the VCR anymore (until after the recording). When the RECORD TIMER light is on, you cannot put the DVD/VCR in VCR mode by pressing VCR or SOURCE. You must first press TIMER SET to cancel the timer recording temporarily. Then, you can use the VCR features again. Follow the steps below to play a videotape repeatedly. (If you are fast forwarding or rewinding the tape, press CLEAR/RESET to remove the menu, then press PLAY B to begin tape playback. ) The tape will play to the end, rewind, then play again. Follow the steps below to reset the VCR's real-time tape counter to zero at a tape location you want to refer to later. Press VCR, then play, fast forward, or rewind a tape to the location that you would like to refer to later. When you later want to return to this point on the tape, press DISPLAY so you can see the counter (while tape play is stopped). When it reaches zero, press PLAY B to play the tape. You may only set the counter to zero at one location at a time. If you remove the tape, the counter will reset to zero at the point at which you last stopped playback whenever you reinsert the tape. Follow the steps below to search forward or backward on a tape a specific length of time. Press VCR, then press SEARCH until the TIME SEARCH screen appears. Within 30 seconds, press o or p until your desired length of time appears. [. . . ] Please check your owner's manual before exchanging the product. Adjustments of the controls discussed there may save you time and money. Please contact Philips at: 1-800-531-0039 In Canada, this warranty is given in lieu of all other warranties. There are no other warranties, express or implied, including any implied warranties of merchantability or fitness for a particular purpose. [. . . ]