User manual PHILIPS DVD755-002

[. . . ] DVD Video player DVD750 / 755 · Instructions for use · Mode d'emploi · Instrucciones de manejo · Bedienungsanleitung · Gebruiksaanwijzing · Istruzioni per l'uso · Manual de utilização General information Laser safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER Type Wave lenght Output Power Beam divergence Semiconductor laser GaAlAs 650 nm (DVD) 780 nm (VCD/CD) 7 mW (DVD) 10 mW (VCD/CD) 60 degree. NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON. The DVD-VIDEO player is in conformity with the EMC directive and low-voltage directive. CLASS 1 LASER PRODUCT CAUTION VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AVOID EXPOSURE TO BEAM ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING VED ÅBNING UNDGÅ UDSÆTTELSE FOR STRÅLING ADVARSEL SYNLIG OG USYNLIG LASERSTRÅLING NÅR DEKSEL ÅPNES UNNGÅ EKSPONERING FOR STRÅLEN VARNING SYNLIG OCH OSYNLIG LASERSTRÅLNING NÄR DENNA DEL ÄR ÖPPNAD BETRAKTA EJ STRÅLEN VARO!AVATTAESSA OLET ALTTIINA NÄKYVÄLLE JA NÄKYMÄTTÖMÄLLE LASER SÄTEILYLLE. [. . . ] ® The currently playing title and chapter number are displayed in the menu bar and the player display. The elapsed playing time is shown in the status window and the player display. q If required, you can use the SOUND key to select Stereo, Dolby Surround or 3D-Sound. Play may stop at the end of the Title, this can result in return to menu. q To stop play at any other time, press 9. ® The default screen will then appear, giving information about the current status of the player. q You can resume play from the point at which you stopped. Press 2 and when you see the Resume icon . ® The RESUME feature applies, not only to the disc in the player, but also to the last four discs you have played. Simply reload the disc, press 2 and when you see the Resume icon . Note: Since it is usual for DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your player, you will see the region code notice on the screen. The disc will not play, and should be unloaded. 3D-SOUND PLAY OPEN/ CLOSE PAUSE OPERATION 23 English Playing a video CD English 24 OPERATION Playing a disc - After inserting the disc and closing the tray, playback starts automatically and the status window and the player display show the type of disc loaded as well as information about the disc's contents and playing time - The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key. - The currently playing track number is displayed in the menu bar and the player display. The elapsed playing time is shown in the status window and the player display. q If required, you can use the SOUND key to select Stereo, Dolby Surround or 3D-Sound. ® The default screen will then appear. q You can resume play from the point at which you stopped. Press 2 and when you see the Resume icon on the screen . , press 2 again. The RESUME feature applies, not only to the disc in the player, but also to the last four discs you have played. Simply reload the disc, press 2 and when you see the Resume icon on the screen . , press 2 again. General features Note: Unless stated otherwise, all operations described are based on remote control operation. A number of operations can also be carried out via the menu bar on the screen. (see `Menu bar operation') Moving to another title/TRACK When a disc has more than one title or track (which you can see from both the menu bar and the player display), you can move to another title as follows: q Press T-C (title), then press P briefly during play to select the next title/track. [. . . ] Check if the disc is defective by trying another disc. If using a HiFi amplifier, try another sound source. Check to make sure that no audio connections are made to amplifier phono input. Reset by switching the player off, then on again. [. . . ]