User manual PHILIPS DVD761

[. . . ] DVD Video player DVD761 1 Important Note DK Advarsel: Laserrudstråling ved åbning når sikkerhesafbrydere er ude af funktion. Undgå u tsættelse for stråling. Bemærk: Netafbryderen POWER er sekundært indkoblet og afbryder ikke strømmen fra nette. Den indbyggede netdel er derfor tilsluttet til lysnettet så længe netstikket sidder i stikkontakten. S Klass 1 laserapparat Varning! [. . . ] Ratings 1 to 8: The disc contains scenes not suitable for children. If you set a rating for the player, all scenes with the same rating or lower will be played. Higher rated scenes will not be played unless an alternative is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, play will stop and the 4-digit code has to be entered. 1 When disc playback is stopped, select ACCESS 2 3 4 5 6 7 CONTROL in the features menu using the w/v keys. Enter the code a second time and reconfirm by pressing OK. Note: ­ If you forget your 4 digit code, it can be cancelled by pressing 9 four times in the `Access Control' dialog. You can then enter a new code (twice!) as described above. Parental Control Disclaimer This DVD player features the PARENTAL CONTROL system which is intended to activate when playing DVD discs furnished with certain software coding. This is according to technical standards adopted by the set maker and disc content industries. Please note that the PARENTAL CONTROL system will not operate a DVD disc which is not furnished with the appropriate software coding. Also note that at the time of release of this DVD player, certain aspects of the technical standards had not been settled between set makers and the disc industries. On this basis Philips cannot guarantee the functioning of PARENTAL CONTROL system and denies any liability associated with unintended watching of disc content. If in doubt, please make sure the disc plays according to your PARENTAL CONTROL settings before you allow children access. 6 Press OK or t to confirm, then press t again to exit the menu. Country 1 When disc playback is stopped, select ACCESS 2 3 4 5 6 CONTROL in the features menu using the w/v keys. Press OK or t to confirm, then press t again to exit the menu. 22 PREPARATION Operation Loading discs 1 Press OPEN/CLOSE on the front of the player. Load your chosen disc in the tray, label side up (also when a double sided DVD is inserted). Make sure it is sitting properly in the correct recess. READ appears in the status window and on the player display, and playback starts automatically. Note: ­ If `Child Lock' is set to ON and the disc inserted is not in the `child safe' list (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see `Access Control'). ¶ Playing a Video CD Playing a disc After inserting the disc and closing the tray, playback starts automatically and the status window and the player display show the type of disc loaded, as well as information about the disc's contents and playing time. The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key. The currently playing track number is displayed in the menu bar and the player display. [. . . ] ¶ Aim the remote control directly at the sensor on the front of the player. ¶ Remove any obstacles between the player and the remote control. ¶ Inspect or replace the batteries in the remote control. ¶ In order to completely reset the player, unplug the AC cord from the AC outlet. [. . . ]