User manual PHILIPS DVD762K-691

[. . . ] DVD/SuperVCD/VCD/CD Player DVD762K DVD/SuperVCD/VCD/CD Player DVD DVD762K Instructions For Use General Information Laser safety This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. Manufactured under license from Dolby Laboratories. "Dolby and the double-D symbol are trademarks of Dolby Laboratories. [. . . ] Press the 34 keys to highlight the DISC LOCK item in the GENERAL SETUP menu. Enter its submenu by pressing the 2 key. Press the 1 key to return to the GENERAL SETUP menu. When playback a locked disc, the DVD player will prompt to enter your password or 3308 (default) password. 2. To change the password , refer to the option PASSWORD in the PREFERENCE menu (see page 31). 23 Setup Menu Program (not available for DVD discs) 1. Press the 34 keys to choose the PROGRAM item. Move the cursor to the field of the submenu by pressing the 2 key. 4. Choose the item ON or OFF by pressing the 34 keys. - ON: Enter the PROGRAM item. Press the SELECT key to enter the program page. Input your favorite track - Input valid track number by pressing the numerical keys, - Press the 1 234 keys to move the cursor to the next selected position. - Repeat the steps above to input another track number until the whole program is completed. Exclude a track - Press the 1 234 keys to move the cursor to track you want to exclude. - Press the CANCEL key. Cancel all tracks - Press the 1 234 keys to move the cursor to the CLEAR button. - Press the SELECT key, all tracks will be cancelled. - Now you can input your favorite tracks again. Playback tracks When programing is completed, - Press the 1 234 keys to move the cursor to the PROG button. - Press the SELECT key, DVD player will playback the selected program in sequence under the programed sequence. Stop the program playback At the PROGRAM page, When programing is completed, - Press the 1 234 keys to move the cursor to the QUIT button. - Press the SELECT key to quit this menu. At playback mode, you can: - Press the STOP key twice to exit. Video output In this menu, you can select the video output for high quality picture. Press the 34 keys to highlight VIDEO OUTPUT in the GENERAL SETUP menu. Press the SELECT key to open its submenu. Press the 2 key to highlight the item of the submenu. - S-VIDEO: Video signals will send an output from the S-VIDEO on the rear panel of the DVD player. - YCBCR: If your TV set is equiped with Y/CB/CR input, you can choose for high quality picture. Press the 1 key to return to the GENERAL SETUP menu. NOTE: Any selection will not influence the signal output of composite video. 24 Setup Menu Screen size (shown on the left) a disc is recorded in the size of wide-screen 16:9, it will have some problem, like distortion or narrowing when playing on a normal TV set with the screen size of 4:3. 0 There are three selections in the item to modify the distorted screen picture: 1. 4:3 LB --- used for 16:9 format movie discs played in 4:3 TV set. [. . . ] 12 months free service. Conditions of warranty l All claims for warranty service should be made to your nearest Philips Authorized Service Center. Reasonable evidence of date of purchase must be Provided. 2 This warranty extends only to defects occurring under normal use of the Product when operated in accordance with the instructions. 3 Home service within the normal service area of one of our Authorised Service Centres will be Provided for television receivers with screen size 48cm and above. [. . . ]