User manual PHILIPS DVDR520H

[. . . ] HDD & DVD Video Player / Recorder DVDR520H User manual Visit us at www. p4c. philips. com for service support Make your own DVD TABLE OF CONTENTS TIMER RECORDING 1 2 3 4 Setting the timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Timer record using the ShowView System . . . . . . . . . . . . . 27 GETTING STARTED Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Important safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] The playback will start. Note: Each new recording session is placed after the previous session unless a certain recording title is set to be overwritten. (Reference the "Overwrite" function in the "Editing" section for additional details. ) Change Chapter Interval Creating chapters while recording The DVD recorder can automatically divide a session into chapters by inserting chapter marks at 5/10/15/20/25/30-minute interval during the recording process. 1. Press [SYSTEM MENU] to display the system menu. Press [p] [q] to select the "RECORD" and press [u]. Press [p] [q] to select "CHAPTER MARK" to set up the interval time. 4. Press [SYSTEM MENU] to exit the system menu. Notes: 1. During recording, press [EDIT] to add chapter mark(s) in the recorded session manually. You can also start recording using the "Guide Menu. " Press [ GUIDE], select "RECORD" and press [OK]. Follow the steps to set the recording mode. Before you start, please ensure that the DVD disc or hard disk has enough available space for the recording session. You cannot change the channel or recording mode during recording. Notes: 1. If a power failure occurs, the program you are recording may be lost. Before you start, please check that the DVD disc or hard disk has enough available space for the recording. You can not change the recording mode during recording. Before playing a DVD+R disc on another player, you first need to finalize the disc. 22 RECORDING Recording from a VCR or Camcorder Before starting to record This DVD recorder can accept standard CVBS (RCA) analog audio/video cable or IEEE-1394 cable and record Camcorder onto DVD in the digital video format of your choice. The unit functions much like a digital VCR. Examples of use include archiving videotapes or transferring from a Video Cassette Recorder or Camcorder to a recordable DVD disc or hard disk drive. This DVD recorder allows basic DV control with the DVD Recorder' remote control when connected via the DV Link. Press the [HDD/DVD] button to set the target device for the recording. If "DVD" is set as the target device, press [ OPEN/CLOSE] to open the disc tray and insert a recordable DVD disc with the label side facing up. 2. Press [SOURCE] to select the signal-input (TV, FRONT AV, SCART, DV). The front panel and rear panel connection Connect a Video Cassette Recorder or Camcorder to the unit' s input terminals. 3. Press [RECORD] to capture your video/audio signal from the VCR or Camcorder onto a recordable DVD disc or hard disk. 5. Press [ STOP] to stop recording. To pause recording Press [ PAUSE] to pause recording. If you want to restart PAUSE] button to resume recording. [. . . ] { Sound } This setting is only applicable if {TV} is selected in the {SOURCE} mode. Select {Stereo}, {Main}, {SAP} or {Mono}. Press OK to confirm. { PDC } Sets the PDC/VPS function. See "About the PDC/VPS function" below. 1 4 Move the cursor to highlight { OK }. [. . . ]