User manual PHILIPS DVDR980

[. . . ] 980 Mode d'emploi Bedienungsanleitung Instrucciones de manejo Istruzioni per l'uso Gebruiksaanwijzing ® Philips Customer Care Centers Luxembourg tel: 352-404061215 Netherlands tel: 0900-8406 Norway tel: 22-748 250 Portugal tel: 352-1-4163063 Spain tel: 34-902-113 384 Sweden tel: 08 5985 2250 Switzerland tel: 0844 800 544 United Kingdom tel: 44-0-208 665 6350 Poland tel: 48-22-571 0571 Austria tel: 43-0-810 001 203 Belgium tel: 32-2-070 222 303 Denmark tel: 808 82 814 Finland tel: 358-09-6158 0250 France tel: 33-1-825 889 789 Germany tel: 49-0-180-535 6767 Greece tel: 30-0-0800-3122 1280 Ireland tel: 353-1-7640292 Italy tel: 800-820026 (Toll Free) English ___________________________________________________4 INDEX 3 English General information English Laser safety This unit employs a laser. To prevent possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER Type Wavelength Output Power (out of objective) Beam divergence Semiconductor laser GaAlAs 660 nm (DVD) 780 nm (CD) 20 mW (DVD writing) 0. 8 mW (DVD reading) 0. 3 mW (CD reading) 60 degree. NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON. [. . . ] l Switch off by pressing B STANDBY/ON. RECORDING 35 English English How to clear a timer block CLEAR TIMER SELECT l l l l Press TIMER on the remote control. Select `Timer list' with w or v (down up cursor). Select the timer block you want to clear with w or v (down up cursor). l Switch off by pressing TIMER. 36 RECORDING Playback Playing a DVD+RW or DVD+R disc The currently playing title and chapter number are displayed on the recorder display. Notes: - DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your recorder, you will see the region code notice on the screen. The disc will not play, and should be unloaded. - The region code is stated on a label on the back side of your recorder. - Regional coding is not applicable for recordable DVD discs. l The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key; if not, use the w v u t (down up right left cursor) keys to highlight your selection, and press OK. l To stop play at any time, press 9 STOP. The default screen will appear, giving information about the current status of the recorder. PREVIOUS REC/OTR NEXT l Insert a DVD+RW or DVD+R disc. If the inserted disc is write-protected, playback starts automatically otherwise the Index Picture Screen appears. Playback starts automatically from the point where it was stopped the last time the disc was played or recorded. If you want to start playback from the beginning of the disc, you can do so via the Index Picture Screen (see `Index Picture Screen'). If the disc is a new blank disc, the display will show `EMPTY DISC'. l To stop playback at any time, press 9 STOP. You return to the Index Picture Screen. Playing a pre-recorded DVDVideo disc REVERSE PAUSE SLOW FORWARD STOP FSS PLAY Some DVD discs are produced in a way that requires specific operation or allows only limited operation during playback. In these cases the recorder may not respond to all operating commands. When this occurs, please refer to the instructions in the disc inlay. When a appears on the TV screen, the operation is not permitted by the recorder or the disc. [. . . ] A system for simulating Multi-channel sound reproduction via a twochannel set-up, by SRS Labs, Inc. There are various systems for transmitting television signals, for example PAL, PAL-I, PAL-BG, SECAM, SECAM-DK, NTSC, etc. Video Compact Disc Video Cassette Recorder Video Programming System PCM PDC RGB SCART SECAM SHOWVIEW S-video SVCD Title TruSurround TV system VCD VCR VPS 56 TROUBLESHOOTING Appendix Using your DVD recorder remote control with your TV set Your DVD recorder remote control can transmit several commands to TV sets of different brands. The following keys will always operate the TV set: CLEAR TIMER SELECT VOL CH MUTE If your TV set does not respond to the remote control, you can re-programme your remote control. [. . . ]