User manual PHILIPS DVDR985/051

[. . . ] 985 Instructions for use General information Laser safety This unit employs a laser. To prevent possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER Type InGaAlP semiconductor laser (DVD) AlGaAs semiconductor laser (CD) Wavelenght 660 nm (DVD) 780 nm (CD) Output Power 20 mW (DVD writing) (out of objective) 0. 8 mW (DVD reading) 0. 3 mW (CD reading) Beam divergence 82 degrees (DVD) 54 degrees (CD) NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON. [. . . ] l Switch off by pressing B STANDBY/ON. RECORDING 33 English Playback English Playing a DVD+RW or DVD+R disc l Insert a DVD+RW or DVD+R disc. If the inserted disc is write-protected, playback starts automatically otherwise the Index Picture Screen appears. Playback starts automatically from the point where it was stopped the last time the disc was played or recorded. If you want to start playback from the beginning of the disc, you can do so via the Index Picture Screen (see `Index Picture Screen'). If the disc is a new blank disc, the display will show `EMPTY DISC'. l To stop playback at any time, press 9 STOP. You return to the Index Picture Screen. Notes: - DVD movies to be released at different times in different regions of the world, all players have region codes and discs can have an optional region code. If you load a disc of a different region code to your recorder, you will see the region code notice on the screen. The disc will not play, and should be unloaded. - The region code is stated on a label on the back side of your recorder. - Regional coding is not applicable for recordable DVD discs. l The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key; if not, use the w v u t (down up right left cursor) keys to highlight your selection, and press OK. l To stop play at any time, press 9 STOP. The default screen will appear, giving information about the current status of the recorder. PREVIOUS REC/OTR NEXT REVERSE PAUSE SLOW FORWARD Playing a pre-recorded DVDVideo disc STOP FSS PLAY Some DVD discs are produced in a way that requires specific operation or allows only limited operation during playback. In these cases the recorder may not respond to all operating commands. When this occurs, please refer to the instructions in the disc inlay. When a appears on the TV screen, the operation is not permitted by the recorder or the disc. If the disc is two-sided, make sure the label of the side you want to play is facing up. When `autoresume' is set to `On' (see `User Preferences') playback starts automatically from the point where it was stopped, the last time the disc was played. When `autoresume' is set to `Off', the disc will play from the start of the disc. You can however resume play from the point at which you stopped, the last time the disc was played, by pressing 2 PLAY when appears on screen. [. . . ] A system for simulating Multi-channel sound reproduction via a twochannel set-up, by SRS Labs, Inc. There are various systems for transmitting television signals, for example PAL, PAL-I, PAL-BG, SECAM, SECAM-DK, NTSC, etc. Video Compact Disc Video Cassette Recorder A system by which you can easily program a timer recording by entering a nine-digit VideoPlus+ number found next to the programme description in most TV guides. Video Programming System PCM PDC RGB SCART SECAM S-video SVCD Title TruSurround TV system VCD VCR VIDEO Plus+ VPS GLOSSARY 53 English PAL See TV system. Appendix English Using your DVD recorder remote control with your TV set Your DVD recorder remote control can transmit several commands to TV sets of different brands. [. . . ]