User manual PHILIPS DVDR990-051

[. . . ] General information Laser safety This unit employs a laser. To prevent possible eye injury, only a qualified service person should remove the cover or attempt to service this device. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. LASER Type InGaAlP semiconductor laser (DVD) AlGaAs semiconductor laser (CD) Wavelenght 660 nm (DVD) 780 nm (CD) Output Power 20 mW (DVD writing) (out of objective) 0. 8 mW (DVD reading) 0. 3 mW (CD reading) Beam divergence 82 degrees (DVD) 54 degrees (CD) NEVER MAKE OR CHANGE CONNECTIONS WITH THE POWER SWITCHED ON. [. . . ] l To stop play at any time, press 9 STOP. The default screen will appear, giving information about the current status of the recorder. Playing a pre-recorded DVDVideo disc Some DVD discs are produced in a way that requires specific operation or allows only limited operation during playback. In these cases the recorder may not respond to all operating commands. When this occurs, please refer to the instructions in the disc inlay. When a appears on the TV screen, the operation is not permitted by the recorder or the disc. If the disc is two-sided, make sure the label of the side you want to play is facing up. When `autoresume' is set to `On' (see `User Preferences') playback starts automatically from the point where it was stopped, the last time the disc was played. When `autoresume' is set to `Off', the disc will play from the start of the disc. You can however resume play from the point at which you stopped, the last time the disc was played, by pressing 2 PLAY when appears on screen. The currently playing title and chapter number are displayed on the recorder display. The elapsed time is shown also. Note: During playback you can display and enter the menu by pressing DISC MENU. Playing a (Super) Video CD disc l Insert a (Super) Video CD. When `autoresume' is set to `On' (see `User Preferences') playback starts automatically from the point where it was stopped, the last time the disc was played. The disc may invite you to select an item from a menu. If the selections are numbered, press the appropriate numerical key 0-9. l To stop play at any time, press 9 STOP. The default screen will appear. 34 PLAYBACK General features Moving to another chapter/index When a title on a disc has more than one chapter or a track has more than one index, you can move to another chapter/index as follows: l Press K NEXT during play to select the next chapter/index. l Press J PREVIOUS during play to return to the beginning of the current chapter/index. Rapidly press J PREVIOUS twice to step back to the previous chapter/index. l To go directly to any chapter or index, enter the chapter or index number using the numerical keys 0-9. Notes: - If the number has more than one digit, press the keys in rapid succession. - If the system menu bar is on screen, make sure the icon is selected. Note: Unless stated otherwise, all operations described are based on remote control operation. A number of operations can also be carried out via the system menu bar on the screen. [. . . ] A system for simulating Multi-channel sound reproduction via a twochannel set-up, by SRS Labs, Inc. There are various systems for transmitting television signals, for example PAL, PAL-I, PAL-BG, SECAM, SECAM-DK, NTSC, etc. Video Compact Disc Video Cassette Recorder A system by which you can easily program a timer recording by entering a nine-digit PlusCode number found next to the programme description in most TV guides. Video Programming System PCM PDC RGB SCART SECAM S-video SVCD Title TruSurround TV system VCD VCR VIDEO Plus+ VPS GLOSSARY 55 English PAL See TV system. Appendix English Using your DVD recorder remote control with your TV set Your DVD recorder remote control can transmit several commands to TV sets of different brands. [. . . ]