User manual PHILIPS DVP3310K

[. . . ] This product incorporates copyright protection technology that is protected by method claims of certain U. S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. [. . . ] If your receiver or amplifier is NOT capable of handling 96KHz signals, select 48KHz. When this choice is made, this unit will automatically convert any 96KHz signals to 48KHz so your system can decode them. If your receiver or amplifier is capable of handling 96KHz signals, select 96KHz. When this choice is made, this unit will pass each type of signal through without any further processing. Dynamic Range Control (DRC) DVD With the DVD format, you can hear a program's soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones). Then, you may listen to a movie at a lower volume without losing clarity of sound. Set DRC to On for this effect. PBC VCD 2. 0 Set Playback Control (PBC) to On or Off. On:Video CDs with PBC are played according to the PBC. Off:Video CDs with PBC are played the same way as Audio CDs. Auto Play DVD You can set up the DVD Player so a DVD disc automatically starts playing whenever the DVD is inserted. If Auto Play mode is set to On, this DVD player will search a title that playback time is long most and then play back the title automatically. Off: Auto Play function is not activated. Note The Auto Play function may not work for some DVDs. 19 Before Operation (Continued) - DVD part LOCK (Parental Control) LOCK Rating Password Area Code Unlock New GB Password (Security Code) You can enter or change password. Move Select 1 2 3 4 1 2 3 Select "Password" on the "LOCK" menu then press 2. If the quality of the recording is poor, repeatedly press 3 or 4 on the remote control to manually adjust the tracking until any distortions have been removed. Press numbered 0 on the remote control to switch automatic tracking back on again. 5 6 Slow motion playback, Shuttle : During playing back or still picture press 1 or 2. You can reach the following playback speeds. (-7xplay, -5xplay, -play, still, 1/19 slow, play, 2xplay, 7xplay) To switch off the slow motion and shuttle, press the desired function. During slow motion and shuttle, the noise bars may appear on the picture according to the status of tape. If distortions can be seen in the picture, reduce them with 3 or 4. If the end of the tape is reached, your DVD+VCR will stop playback automatically, rewind, stop, eject the tape. 1 2 Make sure that you have correctly connected your VCR as described earlier in this book. Insert the video cassette into your DVD+VCR. The video cassette should have the window side facing up and the arrow facing away from you. Press PLAY B to start playing your tape. If you load a video cassette which has had its record protection tab removed, playback of the cassette will start automatically. OPR (Optimum Picture Response) This feature automatically improves playback picture quality by adjusting your DVD+VCR to the condition of the tape. 1 Press SYSTEM MENU. 12 REC PSET R Pr-12 OFF SOFT NIC ACMS SYS SETSHARP + - AUTO TRACKING Your DVD+VCR will automatically adjust the tracking to give the best picture quality. AUD f OSD ON OFF DECODER i 3 Press PAUSE/STEP ; to still a picture. [. . . ] G Select the appropriate video input mode on the TV so the picture from the DVD player appears on the TV screen. G Connect the video cable into the jacks securely. G Select the correct input mode of the audio receiver so you can listen to the sound from the DVD player. G Connect the audio cable into the jacks securely. [. . . ]