User manual PHILIPS DVP5996K

[. . . ] Register your product and get support at www. philips. com/welcome DVP5996K EN ZH_CN DVD Video Player DVD²¥·Å»ú 6 58 dvp5996K_93_eng. indd 1 2008-03-12 8:40:53 AM O X X X O O O O O O O O O O O O O O O O O O O O X O O O O O O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363 ­ 2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363 - 2006. Environmental Protection Use Period This logo refers to the period ( 10 years ) during which the toxic or hazardous substances or elements contained in electronic information products will not leak or mutate so that the use of these [substances or elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets. Battery labeling logo Environmental Protection Use Period This logo refers to the period ( 5 years ) during which the toxic or hazardous substances or elements contained in the battery will not leak or mutate so that the use of these [substances or elements] will not result in any severe environmental pollution, any bodily injury or damage to any assets. dvp5996K_93_eng. indd 2 2008-03-12 8:40:54 AM LASER Type Wave length Output Power Beam divergence Laser Safety Semiconductor laser InGaAlP (DVD) AIGaAs (CD) 658 nm (DVD) 790 nm (CD) 7. 0 mW (DVD) 10. 0 mW (VCD/CD) 60 degrees This unit employs a laser. Due to possible eye injury, only a qualified service person should remove the cover or attempt to service this device. NOTE: Pictures shown maybe different between countries. [. . . ] ­ WhentheUSBdevicedoesnotfitintothe USBjack, aUSBextensioncable(not supplied)isrequired. ­ Copy-protectedfilesarenotplayable. A Connect the USB flash drive directly to the jack on this unit. B A message appears on the TV when the device is detected. C Press on the remote control to access the data in the drive. 5 dvp5996K_93_eng. indd 35 2008-03-12 8:41:09 AM Create MP3 files Creating audio CD to MP3 format This feature allows you to convert audio tracks from an audio CD into MP format. The created MP files are saved in your USB device. { Yes } { No } ID information is included in the MP file. English 6 dvp5996K_93_eng. indd 36 2008-03-12 8:41:09 AM A Connect the USB flash drive directly to the jack on this unit. { Device } The created MP files will save in this USB device. F Move to the { TRACK } menu and use keys to select the track that you want to create, then press OK. B Load an audio CD. C During playback, press AUDIO/ CREATE MP3 on the remote control. your action by selecting { YES } in the menu, then press OK. If the USB device is full, a warning message will be displayed. Create MP3 OPTIONS Speed Bitrate CRT ID3 Device Normal 128kbps Yes USB 1 D Read the message on the TV and confirm To l select all tracks, move to { Select all } in the menu and press OK. To l deselect all tracks, move to { Deselect all } in the menu and press OK. G To start creating the tracks, move to TRACK Track01 Track02 Track03 Track04 Track05 Track06 Track07 04:14 04:17 03:58 04:51 03:53 04:09 04:38 SUMMARY Selected Total Time 0 00:00 Start Exit Select all Deselect all E Define your requirements for creating MP files in the { OPTIONS } menu, then press OK. Note: You are able to hear the playback while creating the audio tracks. Fast speed. { Start } in the menu and press OK. The If the USB device is full, a warning message will be displayed. A new folder is created automatically in the USB device to store all the new MP files. Note: If you press one of the buttons on the front panel or remote control (1, ç, x, AUDIO/CREATE MP3 or OK) during creating process, a message `Do you want to stop Creating MP now?' appears on the TV screen. Select { Cancel } to continue creating process. menu and press OK. H To exit the menu, move to { Exit } in the HelpfulHints: ­ DTSCDandcopy-protectedCDcannot becreatedtoMP3format. ­ Writeprotectedorpasswordprotected USBdevicecannotbeusedtostoretheMP3 files. { Fast } { Bitrate } Select a creating bitrate. Default setting is 18 kbps. Setup Menu Options Disc Lock OSD Language Sleep Lip Sync Volume Auto Standby DivX(R) VOD Code You can change the settings in this unit to suit your particular requirements. OK SETUP See `General Setup Page' on this chapter. Audio Setup Page Analog Output Digital Audio Setup HDMI Audio SACD Setup Sound Mode A Press SETUP on the remote control. setup menu appears. The Speaker Setup CD Upsampling B Use keys to select one of the setup menu. If l you are not able to access the { Preference Page }, press SETUP to exit the menu. Then, press x twice before you press the SETUP again. See `Audio Setup Page' on this chapter. Video Setup Page TV Type TV Display Progressive Picture Setting HD JPEG HDMI Setup C Use keys to select a setup option and press to access. D Select your desired setting and press OK to confirm. Instructions and explanations of the options are provided in the following pages. [. . . ] The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software's level is higher than the user-set level. A system of navigating a Video CD/Super VCD through on-screen menus recorded onto the disc. You can enjoy interactive playback and searching. PCM (Pulse Code Modulation): A system for converting analog sound signal to digital signal for later processing, with no data compression used in conversion. [. . . ]