User manual PHILIPS DVP630

[. . . ] DVD VIDEO PLAYER DVP630 · DVP632 DVD PLAYER 01-36 DVP630_EU_051 1 /05_8239 18/03/2004, 10:04 AM 210 98393 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. If the fitted plug is not suitable for your jack outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] DVD / MP3 FRx2 FRx4 FRx6 FRx8 PLAY FFx2 FFx4 FFx6 FFx8 PLAY VCD / SVCD / CD FRx1 FRx2 FRx3 FRx4 PLAY FFx1 FFx2 FFx3 FFx4 PLAY Programme Playback (DVD/VCD/CD) 1 During playback, press DISPLAY. The time edit box appears. 2 Press DISPLAY once, use 1 2 to highlight one of the option and use numeric key pad (0-9) to enter the number of the desired title (track) / chapter. 3 Press DISPLAY twice, use 2 to highlight the time option and use numeric key pad (0-9) to enter hours, minutes and seconds from left to right in the time edit box. 4 Press OK to confirm selection. 1 In Stop mode, press SYSTEM MENU and press 4 3 to select `General Setup Page'. Playback starts from the selected time on the disc. 2 Select `Program' and set it to ON, then press OK. The `Program' menu appears. Highlight `TIME', then press 3 4 to view the status of the playing disc. For DVD `TITLE ELAPSED/ TITLE REMAIN/ CHP ELAPSED/ CHP REMAIN' appears. For VCD `SINGLE ELAPSED/ SINGLE REMAIN/ TOTAL ELAPSED/ TOTAL REMAIN' appears. Slow Motion (DVD/VCD/SVCD) During playback, press 3 or 4 to select slow reverse (SR) and slow forward (SF) respectively. DVD Press 3 or 4 to select the slow reverse and slow forward speed: SFx2 SFx4 SFx8 PLAY SRx2 SRx4 SRx8 PLAY VCD / SVCD Press 3 to select the slow forward speed: SFx1 SFx2 SFx3 PLAY Helpful Hint: ­ Slow Reverse is not available in VCD/ SVCDs. 3 Use the 1 2 3 4 keys and numeric keypad (0-9) on the Remote Control to select a preferred programme. 4 Press PLAY to start playback. For DVD, the maximum programmable title or chapter is 16. For VCD/CD, the maximum programmable track is 24. To erase a selection in Program, Use the 1 2 3 4 keys to select the programmed item(s), press OK to delete. To list out the programmed item(s), In Stop mode, press SYSTEM MENU to select `Program' to ON and then press OK. 19 /05_8239 18/03/2004, 10:05 AM 210 98393 01-36 DVP630_EU_051 19 Disc Operations Special DVD Features Playing a Title If you want to skip the index menu and playback directly from the beginning, Press DISC MENU key on the remote control to switch to PBC off. Preview (VCD/SVCD/CD) For VCD/SVCD At stop mode, press PREVIEW on the remote control. The preview menu will be displayed. 1 Press RETURN/TITLE. The disc title menu appears on the TV screen. (0-9) to select a play option. 2 Use 341 2 keys or numeric keypad 3 Press OK key to confirm. Camera Angle Press ANGLE repeatedly to select different desired angle. Changing the Audio Language For DVD Press AUDIO repeatedly to select different audio languages. Changing the Audio Channel For VCD Press AUDIO to select the available audio channels provided by the disc (LEFT VOCAL, RIGHT VOCAL, LEFT MONO, RIGHT MONO, STEREO). Subtitles Press SUBTITLE repeatedly to select different subtitle languages. 1. INTRO DVD player will playback every track for few seconds with full screen to obtain a summary of the disc content. 1 Press numerical key pad `1'. DISC This function is used to divide a disc into nine parts by regular intervals and display them on one page to help you preview the whole disc. Special VCD & SVCD Features Playback Control (PBC) For VCD with Playback Control (PBC) feature (version 2. 0 only) Press DISC MENU to toggle between `PBC ON' and `PBC OFF'. If you select `PBC ON', the disc menu (if available) will appear on the TV. Use the S / T or the numeric keypad (0-9) to select a play option, then press PLAY B to start playback. During playback, pressing RETURN/ TITLE will return to the menu screen (if PBC is on). 20 1 Press numerical key pad `2'. 2 3 The preview of 9 track with full screen will appear. To select other tracks beyond this page, press S or T. [. . . ] Parental Control: A function of the DVD to limit playback of the disc by the age of the users according to the limitation level in each country. The limitation varies from disc to disc; when it is activated, playback will be prohibited if the software's level is higher than the user-set level. PCM (Pulse Code Modulation): A system for converting analog sound signal to digital signal for later processing, with no data compression used in conversion. Playback control (PBC): Refers to the signal recorded on video CDs or SVCDs for controlling reproduction. [. . . ]