User manual PHILIPS EXP2480

[. . . ] ­ Old and new or different types of batteries should not be combined. ­ Remove batteries if they are empty or if the player is not going to be used for a long time. ­ Always disconnect the adapter when you are not using it. Do not expose the unit, batteries or CDs to humidity, rain, sand or excessive heat (caused by heating equipment or direct sunlight). [. . . ] The display briefly shows: Audio CD: the total number of tracks and total playing time. ­ If there is no more activity, the set will automatically switch off after 30 seconds. Searching for a passage during playback 1 Press and hold or § to find a particular passage in a backward or forward direction. Searching starts while playback continues at low volume. 2 Release the button when you reach the desired passage. To find a MP3 track, you can first press 3 / 4 to select your desired album. selecting an album · Hold down or press 3 / 4 repeatedly until you find the desired album number. Audio CD: The display shows current track number and elapsed playing time. MP3 CD: The display shows current album/track number and elapsed playing time. ­ When the program is active, use of the 3 / 4 keys are void. Your selected play mode is indicated by 1 Press MODE once or more during playback to activate one of the following. You can store up to 64 tracks to play in a program. A single track may be stored more than once in the program. 001 flashes for you to program a track within the album. With a conventional portable CD player, you might have experienced that music stopped (e. However, ESP does not prevent playback interruptions during vigorous running. It also does not protect the unit against any damage caused by dropping!You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the OFF­RESUME­HOLD slider for these functions. RESUME ­ continuing from where you have stopped 1 Switch the slider to RESUME during playback to activate RESUME. RESUME is shown and playback continues from where you have stopped. When a key is pressed, no action will be executed. [. . . ] The radio tunes to a station with sufficient strength and radio play starts. 2 Release or §, then briefly press or § again when you are close to the desired frequency. To switch from radio play to CD play, press 2; . 2 Press 3 or 4 repeatedly if necessary to select the number that should be assigned to this radio station. [. . . ]