User manual PHILIPS EXP3483

[. . . ] When pressed for more than 2 seconds, the button switches audible feedback (beep) on/off. Switches the player on, starts or pauses CD playback. Stops CD playback, clears a program or switches the player off. Using the remote control The remote control allows you to command all the functions on the player. [. . . ] If the batteries become too warm, recharging will be interrupted for approximately 30 minutes and the display shows: When the batteries are fully recharged, the charging indicator turns green (for charging stand-by) and appears in the display ­ Make sure that the file names of the MP3 files end with . ­ Total number of music files and albums: around 350 (with a typical file length of 20 characters) ­ The length of file names affects the number of tracks for playback. With shorter file names, more files can be burned on a disc. windows Media Audio® is a registered trademark of Microsoft Corporation. All trademarks used are owned by their respective owners. Discs for playback With this set you can play ­ all pre-recorded audio CDs (CDDA) ­ all finalized audio CDRs and CDRWs ­ WMA/MP3-CDs (CD-ROMs with WMA/MP3 files) Important: · CDs encoded with copyright protection technologies by some record companies may be unplayable by this product. ­ Always disconnect the adapter when you are not using it. Disc´s center so that it fits onto the hub. PLAYING A CD 7 Press 9 again to switch off the CD player. Auto-standby When a CD has reached the end of playback and remains in the stop position for more than 25 seconds, the display will disappear. 65 seconds later, the set will automatically switch off to save mains. Briefly press or § once or several times to skip to the beginning of the current, previous or subsequent track. Searching for a passage during playback 1 Keep or § pressed to find a particular passage in backward or forward direction. Searching starts and playback continues at a low volume. You can select up to 50 tracks and store them in the memory in a desired sequence. P with the number of stored tracks is displayed. Display shows EXPANIUM and also "READING CD" if the reading time exceed 5 seconds, e. Then, Audio CD: current track number appears. Briefly press ALBUM +/ - once or several times to skip to the first track of the subsequent, current or previous album. Stop playing the program and continue with step 1 and 2. Reviewing the program You can review the programme by pressing PROG for more than 3 seconds. Volume level resumes at: - Default level 12: when starting playback from standby/power off mode. [. . . ] (Shuffle repeat all): all tracks of the disc play in random order repeatedly. : each track in the disc/program plays 10 seconds in sequence. Complete the ID3 tag information with your MP3 encoder software before burning the WMA/MP3-CD. (Shuffle Album): all tracks of current album play in random order once. [. . . ]