User manual PHILIPS FC 8439

[. . . ] - If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. - Keep the appliance out of the reach of children. [. . . ] Nozzle Convertible nozzle (specific types only) The convertible nozzle can be used on either carpets or hard floors. Reach & Clean nozzle (specific types only) The Reach & Clean nozzle can be used on either carpets or hard floors. The nozzle can be turned 360 degrees to 4 different positions, allowing you to also vacuum clean hard-to-reach places in an easy way. When the nozzle is positioned lengthwise, the suction power is concentrated at the front side of the nozzle (Fig. To adjust the nozzle to the type of floor and the area to be cleaned, put your foot on the indicated spot and then turn the tube until the nozzle is in the required position (Fig. Crevice tool, small nozzle and small brush (specific types only) 1 Connectthecrevicetool, smallnozzleorsmallbrushdirectlytothehandgriportothetube. Accessory clip (specific types only) The accessory clip can simply be snapped onto the tube. The crevice tool and the small nozzle can be snapped onto the clip (Fig. Using the appliance Vacuum cleaning 1 Pull the cord out of the appliance and put the mains plug in the wall socket (Fig. 3 The appliance can be carried in two ways: You can carry the vacuum cleaner vertically by the handle on the front of the appliance (Fig. You can carry the vacuum cleaner horizontally by the handle on top of the appliance. You can adjust the suction power while vacuum cleaning. 1 Adjust the suction power by means of the electronic suction power knob (Fig. Use maximum suction power for vacuum cleaning very dirty carpets and hard floors. [. . . ] By doing this you will help to preserve the environment (Fig. Guarantee & service If you need information or if you have a problem, please visit the Philips website at www. [. . . ]