User manual PHILIPS FC6047

[. . . ] Read these instructions for use carefully and look at the illustrations before you start using the appliance. Only charge the vacuum cleaner with the charger supplied. You can clean the appliance with a damp cloth. [. . . ] Charge the appliance for at least 16 hours before you use it for the first time. The indicator light (E) will stay on as long as the appliance is connected to the wall holder and the mains plug is in the wall socket. The indicator light does not give any information about the charge level of the built-in batteries. Using the appliance - Switch the appliance on by pressing the on/off button (A) and keeping it pressed in (fig. Leave the charger plug in the wall socket and always put the vacuum cleaner back onto the holder immediately after use, even if the batteries are still almost fully charged. Make sure you insert the filter in the correct way (fig. Clean the filter with a brush or with a normal vacuum cleaner if it is very dirty. If necessary, clean the filter with cold or lukewarm water. Never use the vacuum cleaner when the filter is still wet. Replacing the filter Replace the filter if it can no longer be cleaned properly (usually after having been cleaned 50 times). New (replacement) filters are available under type no. Gently turn the filter clockwise to detach it from the frame (fig. Remove the old filter and replace it with a new filter (fig. Environment NiCd/NiMH batteries can be harmful to the environment and may explode if exposed to high temperatures or fire. [. . . ] Information & service If you need information or if you have a problem, please visit the Philips Web site at www. Com or contact the Philips Customer Care Centre in your country (you will find its phone number in the worldwide guarantee leaflet). If there is no Customer Care Centre in your country, turn to your local Philips dealer or contact the Service Department of Philips Domestic Appliances and Personal Care BV. [. . . ]