User manual PHILIPS FC6067

[. . . ] do not suck up flammable or corrosive liquids. Do not let water enter the vacuum cleaner or the wall holder. Never immerse the vacuum cleaner or the wall holder in water. [. . . ] Always place the vacuum cleaner back Onto the holder (also when the built-in batteries are fully charged). 1 Make sure the deflector and the filter have been inserted into the dust compartment before you start using the appliance. Push the filter firmly into the dust compartment. Stop sucking up liquids when the liquid level inside the dust compartment has reached the maximum indication line. When sucking up liquids, hold the appliance with the dust compartment pointing downwards at an angle. Do not hold the appliance with its dust compartment pointing upwards, as this would cause liquid to enter the appliance and damage the parts inside. Empty the dust compartment each time you have used the appliance to suck up a liquid. Use the crevice tool to vacuum clean hard-to-reach places. Do not use the crevice tool to suck up liquids. Clean the filter and empty the dust compartment. Clean the filter with a brush or with a normal vacuum cleaner if it is very dirty. Gently turn the filter clockwise to detach it from the frame. Remove the old filter and replace it with a new filter. Put the filter and the deflector back into the dust compartment. You can clean the appliance with a damp cloth. Remove the mains plug from the wall socket before cleaning the wall holder. Do not let water enter the vacuum cleaner or the wall holder. Never immerse the vacuum cleaner or the wall holder in water. [. . . ] Let the appliance run until it stops, undo the screws and open the vacuum cleaner. If you are not going to use the appliance for a longer period of time, we advise you to remove the charger plug from the wall socket to save energy. If you need information or if you have a problem, please visit the Philips Web site at www. [. . . ]