User manual PHILIPS FC8133/01

[. . . ] Register your product and get support at www. νικα 39 Suomi 50 Français 61 Italiano 72 Nederlands 83 Español 94 Norsk 105 Português 116 Svenska 127 Türkçe 138 FC8138 - FC8130 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Danger -- Never suck up water or any other liquid. [. . . ] 2 Clean the appliance and its parts with a damp cloth. Do not clean any part of the vacuum cleaner in the dishwasher. 12 English Cleaning the HEPA exhaust filter To maintain optimal performance, clean the HEPA filter each time you replace the dustbag. 1 To open the HEPA exhaust filter grille, grab the tabs and pull the grille upwards to remove it from the appliance. -- Hold the filter in such a way that the pleated side points upwards and the water flows parallel to the pleats. Hold the filter at an angle so that the water washes away the dirt inside the pleats. -- Turn the filter 180° and let the water flow along the pleats in the opposite direction. -- Continue this process until the filter is clean. Never clean the HEPA exhaust filter with a brush. Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power. 4 Carefully shake the water from the surface of the HEPA exhaust filter. Let the HEPA exhaust filter dry completely before you put it back into the vacuum cleaner. 5 Place the dry HEPA exhaust filter back into the appliance. 6 To close the HEPA exhaust filter grille, first align the lugs on the top of the grille with the slots in the appliance (1). Then press the tabs downwards until the grille locks into place (2) (‘click’). English Cleaning the motor protection filter 13 To maintain optimal performance, clean the motor protection filter at least once a year. 2 Lift the dustbag holder out of the appliance. Make sure you hold the dustbag upright when you lift it out of the appliance. 3 Pull the filter holder with the motor protection filter out of the appliance. 4 Take the motor protection filter out of the holder. Shake the motor protection filter over a dustbin to clean it. 5 Put the filter in the filter holder and slide the filter holder back into the appliance. [. . . ] Storage 1 Switch off and unplug the appliance. 2 Press the cord rewind button to rewind the cord. 3 Put the appliance in upright position. To attach the nozzle to the appliance,  insert the ridge on the nozzle into the storage slot. [. . . ]