User manual PHILIPS FC8734 TRI-ACTIVE

[. . . ] Register your product and get support at www. νικα 51 Español 67 Suomi 82 Français 97 Italiano 112 Nederlands 127 Norsk 142 Português 158 Svenska 173 Türkçe 188 215 228 FC8749-FC8710 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. Philips incorporates the latest technologies to create products that are good for the environment in terms of energy consumption as well as material usage. [. . . ] 12 English Crevice tool and small nozzle (specific types only) 1 Connect the crevice tool (1) or small nozzle (2) with or without brush attachment (3) to the tube or directly to the handgrip. 3 Brush attachment (specific types only) 1 To assemble the brush attachment, slide it onto the bottom of the small nozzle (‘click’). 2 To disassemble the brush attachment, slide it off the bottom of the small nozzle. Crevice tool, small nozzle and small brush (specific types only) -- You can connect the crevice tool (1), the small nozzle (2) or the small brush (3) directly to the handgrip or to the tube. tri-Active nozzle (specific types only) The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors. English -- The side brushes catch more dust and dirt at the sides of the nozzle and allow you to clean better along furniture and other obstacles. 13 -- The opening at the front of the nozzle allows you to suck up larger particles. 1 Use the hard floor setting to clean hard floors (for instance for tiled, parqueted, laminated and linoleumed flooring): push the rocker switch on top of the nozzle with your foot to make the brush strip come out of the housing. At the same time, the wheel is lifted to prevent scratching and to increase manoeuvrability. 2 Use the carpet setting to clean carpets: push the rocker switch again to make the brush strip disappear into the nozzle housing. Combination nozzle (specific types only) You can use the combination nozzle on carpets (with the brush strips folded in) or on hard floors (with the brush strips folded out). 1 To clean hard floors, push the rocker switch on top of the combination nozzle with your foot. The brush strips come out of the nozzle housing. 14 English 2 To clean carpets, push the rocker switch again to make the brush strips disappear into the nozzle housing again. Using the appliance 1 Pull the cord out of the appliance and put the mains plug in the wall socket. 2 Press the on/off button to switch on the appliance. -- During vacuuming, you can adjust the suction power with the suction power knob. -- Use maximum suction power to vacuum very dirty carpets and hard floors. -- Use minimum suction power to vacuum curtains , table carpets , etc. -- If you want to pause for a moment, insert the ridge on the nozzle into the parking slot to park the tube in a convenient position. Cleaning and maintenance Do not clean any parts of the appliance in the dishwasher. Always switch off the appliance and unplug it before you remove and clean any parts. [. . . ] Switch on the vacuum cleaner to force the air through the blocked-up item in opposite direction. Insert the filter cylinder properly in the filter cylinder case. The suction power You have selected a low is insufficient. The filter cylinder is clogged with dirt. [. . . ]