User manual PHILIPS FC9304/01

[. . . ] νικα 43 Español 56 Suomi 68 Français 80 Italiano 92 Nederlands 105 Norsk 117 Português 129 Svenska 141 Türkçe 153 FC9306, FC9304, FC9302 6 English Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. This vacuum cleaner’s extremely efficient motor produces less noise than other types and yields a high performance at a low power consumption. €1) 1 On/off button 2 Suction power selection wheel 3 Cord rewind button 4 Dustbag-full indicator 5 Hose release buttons 6 Hose connection opening 7 Cover release tab 8 Motor protection filter holder 9 Dustbag holder 10 Dustbag 11 Removable strip (specific types only) 12 Reusable dustbag (specific types only) 13 Handgrip 14 Accessory holder 15 SilentStar nozzle 16 Rocker switch for carpet/hard floor settings 17 Crevice tool 18 Small brush 19 Small nozzle 20 2-piece telescopic tube 21 HEPA 13 washable filter 22 Filter cover 23 Mains plug 24 Parking slot 25 Release button of filter cover 26 Storage grip 27 Swivel wheel 28 Parking/storage ridge 29 Type plate 30 Rear wheels  Important Read this user manual carefully before you use the appliance and save it for future reference. [. . . ] 4 To continue vacuum cleaning, simply press the on/off button on top of the appliance to switch on the appliance. Storage 1 Switch off the appliance and remove the mains plug from the wall socket. 2 Press the cord rewind button to rewind the mains cord. 3 Put the appliance in upright position. To attach the nozzle to the appliance,  insert the ridge on the nozzle into the storage slot. -- To ensure stable parking of the telescopic tube, adjust the tube to the shortest length. Tip:We advise you to wrap the hose around the tube to ensure stable parking and to save even more space when you store the appliance. Replacing/emptying the dustbag Tip:We advise you to clean the motor protection filter every time you replace or empty the dustbag (see chapter ‘Cleaning and maintenance of filters’). Always unplug the appliance before you replace the disposable dustbag or empty the reusable dustbag. 12 English Before replacing/emtying the dustbag In some cases, the dustbag full indicator can indicate that the dustbag is full, even though it is not. This may occur if the pores of the dustbag are clogged (e. When you have vacuumed ashes, fine sand, lime, cement dust and similar substances) or if something is blocking the nozzle, tube and/or hose. €If the pores of the dustbag are clogged, you have to replace the disposable dustbag or empty the reusable dustbag, even if it is not full yet. If the dustbag is not clogged but not full either, something is blocking the nozzle, tube and/or hose. In this case, do not replace the dustbag but remove the obstruction. Replacing the disposable dustbag -- Replace the dustbag as soon as the dustbag-full indicator has changed colour permanently, i. Even when the nozzle is not placed on the floor. 2 Lift the dustbag holder out of the appliance. Make sure you hold the dustbag upright when you lift it out of the appliance. 3 Pull at the cardboard tag to remove the full dustbag from the holder. , , When you do this, the dustbag is sealed automatically. English 13 4 Slide the cardboard front of the new dustbag into the two grooves of the dustbag holder as far as possible. [. . . ] Note: Cleaning does not restore the original colour of the filter, but does restore its filtration power. 5 Carefully shake the water from the surface of the filter. Let the filter dry completely for at least 2 hours before you put it back into the vacuum cleaner. 6 Put the dry filter back into the appliance. [. . . ]