User manual PHILIPS FC9312/01

[. . . ] νικα 41 Español 54 Suomi 66 Français 78 Italiano 91 Nederlands 104 Norsk 117 Português 129 Svenska 141 Türkçe 153 1 4 English Table of contents Introduction 4 General description 4 Important 5 Before first use 6 Preparing for use 6 Using the appliance 9 Storage 10 Maintenance 10 Ordering accessories 14 Environment 14 Guarantee and service 14 Troubleshooting 14 Introduction Congratulations on your purchase and welcome to Philips!To fully benefit from the support that Philips offers, register your product at www. This vacuum cleaner’s extremely efficient motor produces less noise than other types and yields high performance at low power consumption. Danger -- Never suck up water or any other liquid. [. . . ] 3 To switch off the appliance, press the on/off button on top of the appliance. 10 English Adjusting suction power 1 During vacuum cleaning, you can adjust the suction power with the selection wheel on top of the appliance. -- Use maximum suction power to vacuum very dirty carpets and hard floors. Note: By reducing suction power, you can move the nozzle across the floor more easily. Pausing during use 1 If you want to stop vacuum cleaning for a moment, press the on/off button on top of the appliance to switch off the appliance. 2 Insert the ridge on the nozzle into the parking slot to park the tube in a convenient position. 3 To ensure stable parking of the telescopic tube, adjust the tube to the shortest length. 4 To continue vacuum cleaning, simply press the on/off button on top of the appliance to switch on the appliance. Storage This vacuum cleaner has not one, but two carrying handles. When it is on its wheels, there is a handle on top which enables you to move the vacuum cleaner around easily with very little bending. The second handle on the front side of the appliance enables you to comfortably carry it around in upright position. 1 Switch off the appliance and remove the mains plug from the wall socket. 2 Press the cord rewind button to rewind the mains cord. 3 Put the appliance in upright position. To attach the nozzle to the appliance,  insert the ridge on the nozzle into the storage slot. -- To ensure stable parking of the telescopic tube, adjust the tube to the shortest length. Tip:We advise you to wrap the hose around the tube to ensure stable parking and to save even more space when you store the appliance. Maintenance Always unplug the appliance before you clean the appliance, before you replace the dustbag and before you replace the filters. English Dustbag 11 Note: In some cases, the dustbag-full indicator can indicate that the dustbag is full, even though it is not. This may occur if the pores of the dustbag are clogged (e. When you have vacuumed ashes, fine sand, lime, cement dust and similar substances) or if something is blocking the nozzle, tube and/or hose. If the pores of the dustbag are clogged, you have to replace the dustbag, even if it is not full yet. [. . . ] Then push the filter cover towards the appliance (2). 5 Press home the filter cover to lock it (‘click’). note: Make sure the filter is properly closed. Tip: For optimal results, replace the HEPA 13 filter every 2 years. [. . . ]