User manual PHILIPS FM51FD00B

[. . . ] This product complies with EN55022 Class B and EN55024 for use in the following areas; residential, commercial, and light-industrial. notes on Use · The USB Flash Drive may not function correctly if it is connected to the computer when the computer is started up, restarted, or restored from sleep mode. Always disconnect the drive from the computer before performing any of these operations. ⷠDo not place the drive in locations that are: ­ extremely hot or cold ­ vibrating ­ exposed to corrosive gases ­ dusty or dirty ­ very humid ­ exposed to direct sunlight · Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and other countries. [. . . ] Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences for the environment and human health. The making of unauthorized copies of copy-protected material, including computer programmes, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. 0 cards or boards, you may need to initiate installation manually. In this case, follow the on screen instructions to search for a suitable driver. Refer to the operating system's Help file if you need any help. Note: Do not remove the drive from the computer USB port as long as the download process is in progress. 7 When the dialog box appears, specify the folder where the installation program is stored. 11 After confirming that the drive is in standby mode you can remove the drive from the computer's USB port. Note: Do not remove the drive from the computer USB port as long as the download process is in progress. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Connecting the drive to your computer Note: If the USB port of your computer is not easily accessible, you can use the USB extension cable supplied (not all models) or an optional USB hub to connect the drive to your computer. *This number is for the FCC related matters only. CAUTION: You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna. [. . . ] 3 When the Stop a harware device screen appears, make sure the correct information is displayed, then click the OK button. 4 When a message appears, indicating that the device can be safely removed, remove the drive from the computer's USB port. When running Windows XP 1 Double-click the Safely Remove Hardware icon in the task bar in the lower right part of the screen. 2 In the window that appears, select the name of the device that is to be removed, then click the STOP button. [. . . ]