User manual PHILIPS FR 740 & FR740,MV

[. . . ] Surround sound receiver FR740 FR760 MX740 Important notes for users in the U. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. [. . . ] The options offered may vary by TV model. Switching the connection • Press CINEMA LINK to switch the connection between the receiver and the TV either on or off. If CINEMA LINK is switched on and the TV menu is active, TV MENU is displayed and the menu and sound functions on the receiver are locked. SOURCE SELECTION SOURCE SELECTOR When selecting a source by turning SOURCE SELECTOR, the audio inputs – and video inputs (FR 760 only) – with the corresponding name are activated. The incoming signal is reproduced by all audio and – if the source includes a video signal – video outputs of the receiver. The tuner part of the receiver is used, all inputs are switched off. VCR IN audio input and VCR IN video input (FR 760 only) English About 6 CHANNEL / DVD INPUT The 6 CHANNEL / DVD INPUT can be used to connect a device with a built-in multichannel decoder (e. When using the 6 CHANNEL / DVD INPUT audio input, the receiver works as a multichannel amplifier. The source reproduces surround sound and sends it to the receiver divided into the necessary channels. therefore the SURROUND ON/OFF , HALL and SURR. MODE button have no effect since the provided signal is already multichannel. From a source which is connected to the 6 CHANNEL / DVD INPUT audio input cannot be recorded. € You can select the FRONT AV/GAME input by pressing FRONT AV (FR 760 only). 3 Start playback of the source as usual. Recording from a source If you wish to record from a source you must select it with SOURCE SELECTOR. The incoming signal is reproduced by all audio and – if the source includes a video signal – video outputs of the receiver. The sound settings do not affect the recording. 1 Turn SOURCE SELECTOR (or press FRONT AV – FR 760 only) to select the source you want to record from. It must be connected to one of the outputs of the receiver. 3 Start recording on the recording appliance. 4 Start the playback of the source as usual. notes: – The audio and video signal of VCR IN is not reproduced by VCR OUT. [. . . ] r SUBWOOFER R IN PLAY OUT REC IN IN IN PLAY OUT REC CINEMA LINK AUX to AMP TV to AMP Conexiones de vídeo (sólo con FR 760) DVD PLAYER MONITOR / TV ANTENNA FRONT SPEAKERS EACH SPEAKER ≥ 6 Ω CENTER R L AM LOOP CINEMA LINK VIDEO IN/OUT DVD MON VCR TV/SAT SUBWOOFER PRE-OUT SURROUND SPEAKERS EACH SPEAKER ≥ 6 Ω IN 6 CHANNEL / DVD INPUT SURR. FRONT CENTER L L OUT IN PLAY OUT REC IN AUDIO IN/OUT TV CD CENTER PRE-OUT R L CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN VCR CDR/TAPE AVIS RISQUE DE CHOC ELECTRIQUE Designed and developed by Philips in the European Community Manufactured under licence from Dolby Laboratories Licencing Corporation. "DOLBY", "PRO-LOGIC" and the Double-D Symbol are Trademarks of Dolby Laboratories Licencing Corporation. FRONT CENTER L L OUT IN PLAY OUT REC IN AUDIO IN/OUT TV CD CENTER PRE-OUT R L CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN VCR CDR/TAPE AVIS RISQUE DE CHOC ELECTRIQUE Designed and developed by Philips in the European Community Manufactured under licence from Dolby Laboratories Licencing Corporation. [. . . ]