User manual PHILIPS FR-SBCHC8900

[. . . ] Radio equipment for wireless audio applications is not protected against disturbance from other radio services. Wireless transmission The FM transmitter transmits the stereo audio signal from your audio or video source to your FM headphone without wires. Surround Sound The FM headphone features SRS headphoneTM to enjoy full surround experience without disturbing others. extended Frequency response The FM headphone set incorporates improved technology to achieve a frequency response up to 24 kHz enabling the finest musical details to be transmitted. [. . . ] 15 Volume ­ adjust volume to your desired listening level. We have done our best to make the packaging easily separable into two materials: cardboard and polyethylene Your unit consists of materials which can be recycled if disassembled by a specialized company. (For UK, use only Philips SBC CS030/05) 1 Make sure the adapter's rated voltage corresponds to the mains socket voltage. ­ Always disconnect the AC/DC adapter if the transmitter is not to be used for a long period of time. Notes: Completely flat batteries need approximately 16 hours to recharge. The FM headphone will switch off automatically during recharging. Always remove the batteries if the headphone is not to be used for a long period of time. Do not use NiCd batteries or alkaline batteries as these may damage your FM wireless system!2 Take out the batteries and dispose of them properly. 4 Make sure the batteries are correctly inserted as indicated by the engraved symbols in the battery compartment. 5 Put the earcushions back on the earshells. IMPORTANT Before using the FM headphone for the first time, please ensure that the batteries are fully charged for about 16 hours. This will guarantee a longer operating lifetime of the batteries. Do not use NiCd batteries or alkaline batteries as these may damage your FM wireless system!5 When the red power indicator on the FM headphone starts flashing, it indicates that the batteries are running low. ­ Check if the white RCA plug (left channel) is connected to the left channel (white) of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. 6 In case the line output of the audio source has an adjustable output level, adjust the line output level of the audio source to the highest acceptable undistorted level. You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. 4 Switch on your audio source and carefully increase the volume of the audio source. The red power indication LED of the transmitter lights up if receiving an audio signal. You may hear a hissing sound through the headphone if the headphone is not yet properly tuned to the transmitter. [. . . ] Do not expose to direct sunlight, excessive dust, moisture, rain or any kind of mechanical shock. ­ Do not use alcohol, thinner or petroleum-based substances to clean the headphone or transmitter. Use a slightly dampened chamois cloth to clean the housing. ­ Do not use cleaning agents containing alcohol, spirits, ammonia or abrasives as these may harm the housing. [. . . ]