User manual PHILIPS FR931-00S

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che gli apparecchi FR 960 e FR 970 Philips rispondono alle prescrizioni dell'art. [. . . ] If only a letter is shown, this speaker is not used and its sound is reproduced by the other speakers. . . . . . . . virtual 3D surround sound is reproduced DIGITAL SURROUND . . . . digital surround sound is reproduced L, R . . . . . . . . . . . . . . . . . . . . . . . . . . . front left and right speaker C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . center speaker SL, SR . . . . . . . . . . . . . . . . . . . . . . . surround speakers SURROUND. . . . . . . . . . . . . . . . . surround SW. . . . . . . . . . . . . . . . . . . . . . . . . . . . subwoofer A NEWS/TA ATV Ç Menu indication These signs show you if the menu is on or off and indicate in which direction you may move. M E N U . . . . . . . . . . . . . . . . . . . . . . . menu is on 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You may move backwards to the previous menu topic using 1 PREV. / EXIT ("left" key on the remote control). 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You may move up in an option list using X MENU NAVIGATOR ("up" key on the remote control). 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You may move down in an option list using X MENU NAVIGATOR ("down" key on the remote control). 2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . You may move forward to the next menu topic using NEXT 2 ("right" key on the remote control). O K. . . . . . . . . . . . . . . . . . . . . . . . . . . . . You may confirm the displayed value. 14 MENUS English Receiver menu The receiver is equipped with a menu system. The menu is used for the setup of the receiver. The different menu options are related to each other in a logical way. Let's assume you have no center speaker connected, and therefore switched CENTER SPEAKR to NO. If you try to use VOL CENTER, a message will be scrolled that this is not possible (INSTALL CENTER SPEAKER). yIf the connection is switched on, CINEMA LINK ON is displayed. Note: We recommend switching CINEMA LINK off during recording. This avoids unwanted interruptions due to switching TV functions. If CINEMA LINK is switched on and the TV menu is active, TV MENU is displayed and the menu and sound functions on the receiver are locked. English 16 SOURCE SELECTION English SOURCE SELECTOR When selecting a source by turning SOURCE SELECTOR, the audio and video inputs with the corresponding name are activated. The incoming signal is reproduced by all audio and ­ if the source includes a video signal ­ video outputs of the receiver. It is possible to reassign a source selection to other than these standard inputs. Source selected. . . . . . . . Connectors used DVD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . COAX 1 digital audio input and DVD IN video input PHONO. . . . . . . . . . . . . . . . . . . . . . . . . . PHONO IN audio input TUNER . . . . . . . . . . . . . . . . . . . . . . . . . . The tuner part of the receiver is used, all inputs are switched off. CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CD IN audio input CDR/TAPE . . . . . . . . . . . . . . . . . . . . . CDR/TAPE IN audio input TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TV IN audio input and no video input VCR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCR IN audio input and VCR IN video input SAT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SAT IN audio input and SAT IN video input Using one source selection for two or more appliances You may assign more than one source to a source selection. This can be useful when products are connected one after the other in a chain. Example: A VCR is connected to the TV but only the TV is connected to the receiver. Both SOURCE SELECTOR settings, TV as well as VCR, have to use the TV input connectors. [. . . ] 2 Press NEWS/TA: Once to display NEWS, this switches on the news announcement function. Twice to display TA, this switches on the traffic announcement function. Three times to display TA and NEWS, this switches on both announcement functions. 3 Select and play any other source as usual. [. . . ]