User manual PHILIPS FTR9952-69C

[. . . ] 2 Keys in front of the TV receiver box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Your remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4 To use the menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Select the menu language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] è Press the cursor up/down to select Show bars one of the Dual screen demos or Off. When you select Dynamic contrast, Pixel Plus, Digital Noise Reduction or Digital Natural Motion, the TV screen is divided into two parts: in the left part the selected picture quality setting is switched off; in the right part it is switched on. Press the h key again to switch off the Active Control menu. Sound menu Sound TV Smart sound Volume Treble Bass Balance Headphone volume Surround mode (Dual I-II) (Mono/Stereo) (Digital/Analogue) Press the cursor right to select Sound. Select the menu items in the Sound menu with the cursor up/down and adjust the settings with the cursor left/right. Remember, control settings are at normal mid-range levels when the bar scale is centered. Note: - In case of a Cinema Link configuration and the Cinema Link is activated, the menu function Surround mode is steered by the audio receiver instead of by the receiver box. See the separate Cinema Link booklet supplied. - Dual X is only available with dual sound transmission. - Mono/Stereo is only selectable in case of analogue stereo transmission. - Digital/Analogue is only selectable in case of Digital transmission. - In case you connect your TV receiver box with a speakerless monitor and without having connected an audio receiver, all references made to sound reproduction, volume control and audio connections are not applicable. Smart sound Select Smart sound to display a list of predefined sound settings, each corresponding with specific factory settings of Treble and Bass. On timer With the On timer function you can make your TV automatically switch to a specific programme number from standby or switch over to a different programme number at a specific time. Note:Your TV receiver box and your monitor should not be powered off with the B power key. & Select On timer with the cursor down. Off On VCR1 BBC2 CNN TVE . . . . . Daily On timer 15:45 é Press the cursor right to enter the Child lock menu. You're summoned to enter your code. Note:You have to re-enter your code each time you enter the child lock menu. Important:You have forgotten your code !9. é Select On with the cursor right. " Press the cursor right again to enter the programme list. ` Select the TV channel or external you want your TV to switch to on a selected time and day (not possible with a VGA source). ( Press the cursor right again to select a day of the week or to select Daily. § Press the cursor right once again to enter the time with the digit keys or with the cursor up/down and press the OK key to activate. è Press the MENU key to turn off the menu. [. . . ] Select Factory settings in the Setup, General menu, p. · Are the supplied cables connected properly ?(The aerial cable to the receiver box, the other aerial to your recorder, the VGA cables to the display, the power cables. ) · Has the child lock been switched off ?· Do you see a black screen and the indicator in front of the monitor lights up green, this means that the display mode is not supported. [. . . ]