User manual PHILIPS FW-C28

[. . . ] Toll Free Help Line Ligne d'assistance en service libre Linea de ayuda telefónica sin cargo 800-531-0039 FW- C28 Mini Hi-Fi Systems avec Changeur de 3 CD 1 pg 01-24/C28/22-Eng 1 3/7/00, 5:14 PM 3139 116 19331 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] · Repeat steps 3 ­ 5 to store other preset radio stations. Tuning to Preset Radio Stations · Press 4 or 3 to select the desired preset number. TM The preset number, radio frequency, and waveband appear on the display. · The display normally shows the radio station name if available. By repeatedly pressing RDS button you can change the type of display information: TM The display shows in turn: STATION NAME TM PROGRAM TYPE TM RADIO TEXT TM TUNED FREQUENCY TM STATION NAME . . . Receiving RDS Radio Station Ç RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain: · STATION NAME: The radio station name is displayed. · PROGRAM TYPE: The following program types exist and can be received by your tuner: News, Affairs, Info, Sport, Educate, Drama, Culture, Science, Varied, Pop M, Rock M, M. O. R. (middle of the road music), Light M, Classics, Other M, No type. · RADIO TEXT (RT): text messages appear in the display. When you have tuned to a RDS station, the RDS logo (Ç) and the radio station name will appear on the display: Note: ­ When you press the RDS button and the display shows "NO RDS", it indicates that either the tuned station is not transmitting RDS signal or it is a non RDS station. RDS Clock Some RDS station may be transmitting a real clock time at an interval of every minute. Setting the time with RDS clock 1 Press CLOCK·TIMER. TM "--:--" or current time appears on the display. 2 Press CLOCK·TIMER once more to enter clock setting mode. TM "00:00" or current time starts flashing. Notes: ­ You can cancel the automatic programming by pressing PROGRAM or Ç (on the system only). ­ If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed. Notes: ­ When 40 radio stations are stored and you attempt to store another radio station, the display will show "PROGRAM FULL". If you want to change an existing preset number, repeat steps 3 ­ 5. ­ You can cancel manual programming by pressing Ç (on the system only). ­ During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. 15 pg 01-24/C28/22-Eng 15 3/7/00, 5:14 PM 3139 116 19331 English TUNER 3 Press RDS. TM The message "SEARCH RDS TIME" will be displayed. TM If the current station is not receiving any RDS information, "NO RDS TIME" will be displayed. TM When the RDS clock is read, "RDS TIME" will be displayed. The current clock time is displayed for 2 seconds and will be stored automatically. TM If within 90 seconds, the RDS time is not detected, "NO RDS TIME" will be displayed. News (only available in Radio Station with RDS) You can activate NEWS function in Standby or any source mode except Tuner mode. Once the News PTY (program type) is detected in a RDS station, it will switch to TUNER mode automatically. To start NEWS function 1 Press NEWS. [. . . ] TM See section on tape deck maintenance (page 23). · Magnetic build-up in the record/ playback head. · Power failure or AC power plug disconnect from the wall outlet during tape playback. TM Reconnect the AC power plug and switch on the system again. General System does not react when any button is pressed. [. . . ]