User manual PHILIPS FW-C330

[. . . ] Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. How to connect a plug The wires in the mains lead are coloured with the following code: blue = neutral (N), brown = live (L). ¶ As these colours may not correspond with the colour markings identifying the terminals in your plug, proceed as follows: ­ Connect the blue wire to the terminal marked N or coloured black. Connect the brown wire to the terminal marked L or coloured red. [. . . ] , as offered on the market, because they may jam the changer mechanism. ­ Do not load more than one disc into each tray. This system can playback all digital audio CD, finalised digital audio CD-Recordable (CDR) discs and finalised digital audio CD-Rewritable (CDRW)discs. The selected disc tray, total number of tracks and the playing time will appear on the display. notes: ­ Load the discs with the label side facing up. ­ To ensure good system performance, wait until the disc tray completely reads the disc(s) before proceeding. Load up to two discs on the individual disc trays. To load the third disc, press DISC CHANGE. The disc tray will rotate until the empty tray is ready for loading. A disc is loaded in the disc tray the current selected disc tray is empty the current selected disc tray is loaded or playing The disc tray will close to retrieve the inner disc, then reopen with the inner disc accessible. Å All the available discs will play once, then stop. Q To tune to a weak station, press à or á briefly and repeatedly until optimal reception found. To begin automatic preset from a desired preset number q Press í or ë to select the desired preset number. If a radio station has been stored in one of the presets, it will not be stored again under another preset number. All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by MW band. When all the available radio stations are stored or the memory for 40 presets are used, the last preset radio station will be played. Note: ­ If no preset number is selected, automatic preset will begin from preset (1) and all your former presets will be overridden. The preset numbers of all other preset radio stations in the band with higher numbers are also decreased by one. The next available preset number is displayed for selection. To store the radio station to another preset number q Press í or ë to select the desired preset number. Notes: ­ If you attempt to store more than 40 preset radio stations, "FULL" is displayed. ­ During programming, if no key is pressed within 20 seconds, the system will exit the programme mode automatically. [. . . ] ­ The timer will always be switched on after it has been set. The timer will not start if a recording is in progress. ­ The volume of the timer will increase gradually from the minimum level to the last tuned volume level. TIMER for more than two seconds to select timer mode. [. . . ]