User manual PHILIPS FW-C38

[. . . ] Toll Free Help Line Ligne d'assistance en service libre Linea de ayuda telefónica sin cargo 800-531-0039 FW- C38 Mini Hi-Fi Systems avec Changeur de 3 CD pg 01-24/C38/22-En 1 3/7/00, 5:19 PM 3139 116 19381 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: 1 Remove fuse cover and fuse. 2 Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] TM The system will stop searching when all the available radio stations are stored or when the memory for 40 preset radio stations is used. TM The system will remain tuned to the last stored preset radio station. Manual programming 1 Press TUNER (BAND). 2 Press TUNER (BAND) again to select the desired waveband : FM, MW or LW. 3 Press PROGRAM for less than one second. TM The next available preset number will be displayed for selection. 4 Press à or á to tune to the desired frequency. · If you wish to store the radio station to another preset number, press 4 or 3 to select the desired preset number. TM The PROG flag disappears and the radio station will be stored. · Repeat steps 3 ­ 5 to store other preset radio stations. Notes: ­ You can cancel the automatic programming by pressing PROGRAM or Ç (on the system only). ­ If you want to reserve a section of preset numbers, for example preset numbers 1 to 9, select preset 10 before starting automatic programming, only the preset numbers 10 to 40 will be programmed. Notes: ­ When 40 radio stations are stored and you attempt to store another radio station, the display will show "PROGRAM FULL". If you want to change an existing preset number, repeat steps 3 ­ 5. ­ You can cancel manual programming by pressing Ç (on the system only). ­ During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. 15 3/7/00, 5:19 PM 3139 116 19381 English TUNER Tuning to Preset Radio Stations · Press 4 or 3 to select the desired preset number. TM The preset number, radio frequency, and waveband appear on the display. By repeatedly pressing RDS button you can change the type of display information: TM The display shows in turn: STATION NAME TM PROGRAM TYPE TM RADIO TEXT TM TUNED FREQUENCY TM STATION NAME . . . TM When the RDS clock is read, "RDS TIME" will be displayed. The current clock time is displayed for 2 seconds and will be stored automatically. TM If within 90 seconds, the RDS time is not detected, "NO RDS TIME" will be displayed. TM If no RDS station is found in the first 5 presets, the NEWS function will be switched off. The display will show "NO RDS NEWS" and NEWS will disappear from the display. · When NEWS transmission is detected, the system will switch to Tuner mode. To cancel NEWS function · Press NEWS again. [. . . ] · Magnetic build-up in the record/ playback head. · Power failure or AC power plug disconnect from the wall outlet during tape playback. TM Reconnect the AC power plug and switch on the system again. General System does not react when any button is pressed. TM Press STANDBY ON to switch the system off. [. . . ]