User manual PHILIPS FW-M355

[. . . ] MP3-CD Mini Hi-Fi System FW-M355 1 4/17/02, 10:36 AM 3139 pg 001-030/M355/22-Eng 1 115 21421 Important notes for users in the U. K. Mains plug This apparatus is fitted with an approved 13 Amp plug. To change a fuse in this type of plug proceed as follows: Italia DICHIARAZIONE DI CONFORMITA' Si dichiara che l'apparecchio FW-M355 Philips risponde alle prescrizioni dell'art. Fatto a Eindhoven Philips Consumer Electronics Philips, Glaslaan 2 5616 JB Eindhoven, The Netherlands 1 2 3 Remove fuse cover and fuse. Fix new fuse which should be a BS1362 5 Amp, A. S. T. A. [. . . ] Up to 99 tracks can be stored in the memory in any order. 1 2 3 4 Load the desired discs on the disc tray (refer to "Loading discs"). Press í or ë repeatedly (or numeric keys 0-9 on the remote control) to select the desired track. q For MP3 disc, press ALBUM -/+ and TITLE -/+ to select the desired album and title for programming. 17 3139 115 21422 pg 001-030/M355/22-Eng 17 4/17/02, 10:36 AM English CD/MP3-CD Operations English 5 6 Press PROG to store the track. q Repeat steps 3­5 to store other discs and tracks. To end programming, press Ç once. PROG stays and the programme mode remains active. The total number of tracks programmed and the total playing time are displayed. For MP3 disc, total playing time will not be shown. To start programme play, pressÉ . Å "PLAY PROGRAM" is displayed. Notes: ­ It is not possible to create a programme with MP3 tracks from multiple CDs, or combined with normal audio tracks. ­ If the total playing time is more than "99:59" then "--:--" is displayed instead of the total playing time. ­ If you attempt to programme more than 99 tracks, "FULL" is displayed. ­ During programming, if no button is pressed within 20 seconds, the system will exit the programme mode automatically. To review the programme q Stop playback and pressí or ë repeatedly. q To exit review mode, press Ç. Erasing the programme q Press Ç once when playback is stopped or twice during playback. PROG disappears and "PROGRAM CLEARED" is displayed. Note: ­ The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened. 7 For Recording, please refer to "Tape Operation/Recording". 18 3139 115 21422 pg 001-030/M355/22-Eng 18 4/17/02, 10:36 AM Radio Reception DIGITAL SOUND DISPLAY STANDBY-ON OP T AL IM MUTE JA 2 AUX TUNER TAPE 1/2 CD 1/2/3 DSC C ECO POWER H K NO RO 1 BAND TAPE 1 · 2 VIDEO 2 5 8 0 VOLUME 3 6 9 SLEEP MASTER VOLUME 4 7 TUNER MP3-CD TAPE AUX CD SOUND CON TR O L CD 1 N DY CD 2 PLAY· PAUSE CD 3 SEARCH ·TUNING ALBUM+ PROG SEARCH ·TUNING ALBUM- OPEN/ CLOSE É Å í ë MP3-CD TITLETITLE+ D L ITA IG PREV/ PRESET RDS NEWS Tuning to radio stations 1 Press TUNER to select TUNER mode. A few seconds later, the current radio frequency will appear on the display. If an FM station is received in stereo, is displayed. Press TUNER again to select the desired waveband : FM or MW. Press and hold à or á until the frequency indication starts to change, then release. The display will show "SEARCH" until a radio station with sufficient signal strength is found. 2 3 4 Repeat step 3 if necessary until you find the desired radio station. [. . . ] ­ Wait until the moisture condensation at the lens has cleared. ­ Replace or clean the disc, see "Maintenance". ­ Use a finalised CD-RW or a correct MP3-CD format disc. ­ Insert a disc. "NO DISC" is displayed. RADIO RECEPTION Radio reception is poor. ­ If the signal is too weak, adjust the antenna or connect an external antenna for better reception. [. . . ]