User manual PHILIPS FW15

[. . . ] Garancia A forgalombahozó vállalat a termékre 12 hónap garanciát vállal. Névleges feszültség . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 220-230 V Elemes mûködéshez . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x AA/R06 Névleges frekvencia . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] TM The REPEAT disappears from the display. English 17 Shuffle (only on remote control) Repeat (only on remote control) Erasing the program (when playback is stopped) · Press Ç. TM "PROGRAM CLEARED" will be displayed. Note: ­ The program will be erased when the system is disconnected from the power supply or when the CD carousel tray is opened. Notes: ­ REPEAT DISC mode is not available during program play or shuffle mode. ­ You can also repeat shuffling a program. TM "TRACK" or "PROGRAM" will be displayed. TM The REPEAT, PROGRAM and SHUFFLE appear on the display. Note: ­ REPEAT DISC mode is not available when shuffle is selected. pg 01-31/P75-P78/34-Eng 17 2/22/00, 7:29 PM 3139 116 19561 TUNER Storing Preset Stations C MINI HIFI SYSTEM PROGRAM SHUFFLE REPEAT TIMER REC NEWS T. A. AM MW FM LW 60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz STEREO BACK FRONT HSD L PRO LOGIC R S S DOLBY B NR STANDBY ON RDS RDS CLOCK/ TIMER NEWS/TA You can store up to 40 radio stations in the memory. When a preset radio station is selected, the preset number appears next to the frequency on the display. Automatic programming 1 Press TUNER (BAND). TM The PROGRAM starts flashing and "AUTO" will be displayed. When you have tuned to a RDS station, the RDS logo (Ç) and the radio station name will appear on the display: · The display normally shows the radio station name if available. By repeatedly pressing RDS button you can change the type of display information: TM The display shows in turn: STATION NAME TM PROGRAM TYPE TM RADIO TEXT TM TUNED FREQUENCY TM STATION NAME . . . Note: ­ When you press the RDS button and the display shows "NO RDS", it indicates that either the tuned station is not transmitting RDS signal or it is a non RDS station. RDS Clock Some RDS station may be transmitting a real clock time at an interval of every minute. Setting the time with RDS clock 1 Press CLOCK/TIMER. TM "--:--" or current time appears on the display. 2 Press CLOCK/TIMER once more to enter clock setting mode. TM "00:00" or current time starts flashing. TM The message "SEARCH RDS TIME" will be displayed. TM If the station does not transmit RDS clock, "NO RDS TIME" will be displayed. TM When the RDS clock is read, "RDS TIME" will be displayed. The current clock time is displayed for 2 seconds and will be stored automatically. TM If within 90 seconds, the RDS time is not detected, "NO RDS TIME" will be displayed. Note: ­ Some RDS station may be transmitting a real time clock at a minute interval. [. . . ] · Magnetic build-up in the record/ playback head. · Power failure or AC power plug disconnect from the wall outlet during tape playback. TM Reconnect the AC power plug and switch on the system again. · Tape was recorded in one of the Dolby Pro Logic modes. [. . . ]