User manual PHILIPS FW16

[. . . ] If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place. If the mains plug contains a fuse, this should have a value of 5 Amp. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5 Amp. Note: The severed plug must be disposed of to avoid a possible shock hazard should it be inserted into a 13 Amp socket elsewhere. [. . . ] To shuffle all the discs and tracks 1 Press SHUFFLE. TM "SHUFFLE" will be displayed. TM The SHUFFLE, the disc and the track selected at random appear on the display. · The discs and the tracks will be played in random order until you press Ç. · If you press REPEAT during shuffling, the current track or all available discs will be played repeatedly. TM "TRACK" or "ALL DISC" will be displayed. TM The REPEAT and SHUFFLE appear on the display. Notes: ­ If you press any of the CD DIRECT PLAY buttons, the system will play the selected disc or track and the stored program will be ignored temporarily. The PROGRAM display also will disappear temporarily from the display. It will reappear when playback of the selected disc ends. ­ REPEAT DISC mode is not available when program playback begins. Notes: ­ REPEAT DISC mode is not available during program play or shuffle mode. ­ You can also repeat shuffling a program. If you want to change an existing preset number, repeat steps 3 ­ 5. ­ You can cancel manual programming by pressing Ç (on the system only). ­ During programming, if no button is pressed within 20 seconds, the system will exit program mode automatically. Tuning to Preset Radio Stations · Press 4 or 3 (or Digit 0-9 on the remote control) to select the desired preset number. TM The preset number, radio frequency, and waveband appear on the display. pg 01-29/C90/22-Eng 18 3/6/00, 1:53 PM 3139 116 19701 TUNER Receiving RDS Radio Station Ç RDS (Radio Data System) is a broadcasting service that allows FM stations to send additional information along with the regular FM radio signal. This additional information can contain: · STATION NAME: The radio station name is displayed. · PROGRAM TYPE: The following program types exist and can be received by your tuner: News, Affairs, Info, Sport, Educate, Drama, Culture, Science, Varied, Pop M, Rock M, M. O. R. (middle of the road music), Light M, Classics, Other M, No type. · RADIO TEXT (RT): text messages appear in the display. When you have tuned to a RDS station, the RDS logo (Ç) and the radio station name will appear on the display: · The display normally shows the radio station name if available. By repeatedly pressing RDS button you can change the type of display information: TM The display shows in turn: STATION NAME TM PROGRAM TYPE TM RADIO TEXT TM TUNED FREQUENCY TM STATION NAME . . . Note: ­ When you press the RDS button and the display shows "NO RDS", it indicates that either the tuned station is not transmitting RDS signal or it is a non RDS station. RDS Clock Some RDS station may be transmitting a real clock time at an interval of every minute. Setting the time with RDS clock 1 Press CLOCK/TIMER. [. . . ] · Dirty tape heads, capstans or pressure rollers. TM See section on tape deck maintenance (page 28). · Magnetic build-up in the record/ playback head. · Power failure or AC power plug disconnect from the wall outlet during tape playback. [. . . ]